SMT POWER INDUCTORS Wirewound - PD0120NL Series Height: 8.2mm Max Footprint: 16.2mm x 16.0mm Max Current Rating: up to 15.4A Inductance Range: 1.2H to 55.4H 7 Electrical Specifications 25C Operating Temperature -40C to +125C 2 DCR Inductance Inductance Saturation Current Heating Core Loss 1 5. 7 Irated 3 4 (m) (A) Part Number Irated 0 ADC Current Factor (ADC) (H 10%) TYP MAX (H 10%) 25C 100C (A) Kc PD0120.102NL 1.2 15.4 1.5 2.0 1.2 29 24.6 15.4 5556 PD0120.152NL 1.8 14.2 2.5 3.0 1.8 24.3 19 14.2 4444 PD0120.222NL 2.5 11.4 4.0 4.2 2.6 20.6 17.6 11.4 3704 PD0120.332NL 4.5 11.2 6.3 6.8 4.6 15 13 11.2 2778 PD0120.532NL 5.6 10.4 8.0 8.5 5.7 13.6 11.6 10.4 2469 PD0120.702NL 7.1 8.6 9.5 10.0 7.2 12.6 10.6 8.6 2222 PD0120.113NL 12.0 7.6 15.0 16.0 12.2 9 8 7.6 1709 PD0120.183NL 18.3 6.4 21.5 25.5 18.7 7.6 6.6 6.4 1389 PD0120.223NL 22.6 5.3 30.5 35.5 23.1 6.8 6 5.3 1235 PD0120.373NL 39.9 4 51.5 58.5 40.7 5 4.6 4 926 PD0120.503NL 55.4 3.4 75.5 82.5 56.5 4.3 3.8 3.4 794 NOTE: To order RoHS compliant part, add the suffix NL to the part number (i.e. PD0120.102 becomes PD0120.102 NL). Mechanical Schematic * * * %&% Weight .4.25 grams ( ) * +, -C Tape & Reel .250/reel ) & Inches Dimensions: mm 5 Unless otherwise specified, , , , 5 , .010 all tolerances are 0,25 , 3&*4 4* 0. 0 ** %& , , USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 69 SPM2007 (11/07)SMT POWER INDUCTORS Wirewound - PD0120NL Series Notes from Tables Estimated Temperature Rise: 1. The rated current as listed is either the saturation current or the heating current depending on which value is lower833 Trise = Coreloss (mW) + DCRloss (mW) (C) 2. The saturation current is the current which causes the 7.05 inductance to drop by 10% at the stated ambient temperatures 1.63 2.17 Coreloss = 1.86E-12 * (Freq (kHz)) * (Kc * Vsec) (mW) (-40C, 25C and 125C). This current is determined by placing the component in the specified ambient environment and apply- 2 DCRloss = Irms * DCR(m) (mW) ing a short duration pulse current (to eliminate self-heating effects) to the component. 2 2 Irms = IDC + dI (Arms) 12 3. The heating current is the DC current which causes the Freq (kHz) = switching frequency (kHz) temperature of the part to increase by approximately 45C. This Vsec = L (H) * dI or V * D * 1000/Freq (kHz) current is determined by mounting the component on a PCB dI = pk pk ripple current across the component (A) with .25 wide, 3 oz. equivalent copper traces, and applying the V = Voltage across the component (V) current to the device for 30 minutes with no forced air cooling. D = Duty cycle 4. In high volt*time applications, additional heating in the 6. TheN suffix indicates an RoHS-compliant part number. Non- component can occur due to losses in the inductor which may NL suffixed parts are not necessarily RoHS compliant, but are neccessitate derating the current in order to limit the electrically and mechanically equivalent to NL versions. If a part temperature rise of the component. In order to determine number does not have theN suffix, but an RoHS compliant the approximate total losses (or temperature rise) for a given version is required, please contact Pulse for availability. application both copper losses and core losses should be taken into account. 7. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 5. Optional Tape & Reel packaging can be ordered by adding a suffix to the part number (i.e. PD0120.102 becomes PD0120.102T). Pulse complies to industry standard tape and reel specification EIA481. Inductance vs Current Characteristics <4 <4 <4 <4 <4 <4 <4 <4 <4 <4 <4 % & USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 70 SPM2007 (11/07) E F G E 1 % (&