TGL2205SM 26 GHz 100 Watt VPIN Limiter Product Overview The Qorvo TGL2205SM is a high power, wideband GaAs VPIN limiter capable of protecting sensitive receive channel components against high power incident signals. The TGL2205SM does not require DC bias, and achieves a low insertion loss all in a small form factor. These features allow for simple integration with minimal impact to system performance. The TGL2205SM operates from 26 GHz with low 24 Pad 4x4mm Air Cavity QFN Package insertion loss of less than 0.6 dB. It can limit up to 100 W incident pulsed-power with a low flat leakage of less than 16.5 dBm. Key Features The TGL2205SM is offered as a packaged limiter, and is Frequency Range: 2 to 6 GHz well suited for both commercial and defense related Insertion Loss: < 0.6 dB applications. Peak Power Handling: 100 W Flat Leakage: < 16.5 dBm Lead-free and RoHS compliant. Spike Leakage < 17 dBm Passive (no DC bias required) Integrated DC Blocks on the output Recovery time < 115 ns Package Dimensions: 4.00 x 4.00 x 1.47 mm Functional Block Diagram Performance is typical across frequency. Please reference electrical specification table and data plots for more details. Applications Receive Chain Protection Commercial and Military Radar Ordering Information Part Description Top View 1095765 2-6 GHz 100W VPIN Limiter 1095768 TGL2205-SM, EVAL BOARD TGL2205-SMTR7 250 Piece 7 Reel Data Sheet Rev. D, June 2020 Subject to change without notice 1 of 9 www.qorvo.com TGL2205SM 26 GHz 100 Watt VPIN Limiter Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ. Max Units 100 W Passive No Bias Incident Power, CW or Pulsed, 50 , 25 C Operating Temperature Range -40 +25 +85 C 50 W Incident Power, CW or Pulsed, 50 , 85 C Electrical specifications are measured at specified test conditions. Mounting Temperature 260 C Specifications are not guaranteed over all recommended operating (30 s max) conditions. Storage Temperature -40 to 150 C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ. Max Units Operational Frequency Range 2 6 GHz Insertion Loss < 0.6 dB Input Return Loss 12 dB Output Return Loss 12 dB Flat Leakage Power at P > 30 dBm < 16.5 dBm IN Pulse Recovery Time < 115 ns Spike Leakage < 17 dBm Insertion Loss Temperature Coefficient 0.003 dB/ C Notes: 1. Test conditions unless otherwise noted: Temp=+25C, Tuned EVB Results. Thermal and Reliability Information Parameter Test Conditions Value Units 4.5 GHz, CW, 50 , 25 C 31 W Incident Power (1) (RF Operational Life Test ) 100 W 4.5 GHz, Pulsed, PW=10 s, DC=10%, 50 , 25 C Notes: 1. Test terminated after 168 hours. Insertion Loss remained 1 dB for device under test. Data Sheet Rev. D, June 2020 Subject to change without notice 2 of 9 www.qorvo.com