R577133015 Radiall

Technical Data Sheet DPDT Ramses N 12.4GHz Latching 28Vdc Positive common D-sub connector with bracket PAGE 1/2 ISSUE 19.01.15 SERIE : DPDT PART NUMBER : R577133015 RF CHARACTERISTICS Frequency range : 0 - 12.4 GHz Impedance : 50 Ohms Frequency (GHz) DC - 1 1 - 2 2 - 3 3 - 8 8 - 12.4 VSWR max 1.15 1.20 1.25 1.35 1.50 Insertion loss max 0.15 dB 0.20 dB 0.25 dB 0.35 dB 0.50 dB Isolation min 85 dB 80 dB 75 dB 70 dB 60 dB Average power (*) 700 W 500 W 400 W 250 W 200 W ELECTRICAL CHARACTERISTICS Actuator : LATCHING Nominal current ** : 125 mA Actuator voltage (Vcc) : 28V (24 to 30V) / POSITIVE COMMON Terminals : 9 pins D-SUB male connector MECHANICAL CHARACTERISTICS Connectors : N female per MIL-C 39012 Life : 2.5 million cycles Switching Time*** : < 15 ms Construction : Splashproof Weight : < 215 g ENVIRONMENTAL CHARACTERISTICS Operating temperature range : -40C to +85C Storage temperature range : -55C to +85C (* Average power at 25C per RF Path) (** At 25 C 10%) (*** Nominal voltage 25 C) This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.Technical Data Sheet DPDT Ramses N 12.4GHz Latching 28Vdc Positive common D-sub connector with bracket PAGE 2/2 ISSUE 19.01.15 SERIE : DPDT PART NUMBER : R577133015 DRAWING LABEL RADIALL R577133015 0 - 12.4 GHz Un : 28V Lot : General tolerances : 0.5 mm SCHEMATIC DIAGRAM Voltage RF Continuity +C -1 1 3 / 2 4 +C -2 1 2 / 3 4 This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products we reserve the right to make any changes judged necessary.