RoHS PRECISION POWER WIREWOUND RESISTORS RESISTORSCAPACITORSCOILSDELAY LINES SILICONE COATED 1/2 WATT TO 50 WATT RCD 160F Term.W 10K 5% is Pb-free and RoHS 100 SERIES compliant Series 100 resistors offer exceptional performance at an economical cost. Superior stability results from welded construction and windings of premium Worlds widest range 0.005 ~2M, 0.005% ~10%, 0.5W ~50W. grade resistance wire on thermally conductive ceramic cores. Hi-temp sili- TM Low cost, available from stock & exclusive SWIFT delivery program. cone coating provides excellent protection & solvent resistance. Tin (or SnPb) coated copper/copperweld leads ensure proper solderabilty and extended OPTIONS shelf life. Marked with resis.value & tol. as minimum (custom marking avail). Option X: Low Inductance Option P: Increased Pulse Capability PULSE CAPABILITY: Excellent pulse ability is inherent with the all-welded Option F: Flameproof Coating UL94V-0 wirewound construction, but can be enhanced by a factor of 50% or more Option ER: 100-Hour Burn-In via special Option P processing (up to 500 joules). Pulse capability is highly dependent on pulse duration, repetition rate & resis. value, consult factory. Option B: Increased Power Radial leads (opt.R), low thermal emf (opt.E), matched sets, custom INDUCTANCE: small sizes have inductance of 1- 50uH typ. Larger sizes marking, cut & form, Hi-Rel screening, non-standard values, high- and higher values typically have greater levels. For non-inductive design, voltage, etc. Customized components are RCDs speciality specify Opt. X. The max. series inductance for Opt.X resistors at 0.5MHz is DERATING (derate W/V/A ratings when ambient temp >25C): listed in table (per MIL-R-39007). Specialty RCD Type 50 > 50 Char. U is max. power for 0.5% typ. operational life stability & 275C constructions are available for even lower 102X-140X 0.2H 0.37H hotspot Char. V is max. power for 3% stability & 350C hotspot inductance levels (Opt.75 inductance= 145X-160X 0.3H 0.6H 100 165X-178X 0.65H 1.2H 50% of Opt.X, Opt.76=33%). 75 Char. V Char. U 50 Tol <0.1% 9 25 3 1.375 Min A 2 C (type 102~125 is 1.0) D 0 -65 25 50 75 100 125 150 175 200 225 250 275 300 325 350 AMBIENT TEMPERATURE ( C ) DIMENSIONS Numbers in brackets are mm Std. Wattage Opt.B Wattage Maximum 10 10 MIL Resistance 3 2 8 Ratings Ratings A C D .003 .08 Voltage RCD 5 6,7 Type Range 1,6 Type Rating 110-155: .032 Char.U Char.V Char.U Char.V .062 1.58 Std. Optional 156-190: .045 102 - 0.5 0.8 0.8 1.0 .01 - 2K 30V .16 .03 4..8 .07.02 1.8.5 .020 - 110 RW81 (110B) 0.8 1.0 1.5 2.0 .01 - 8K 40V .24 .03 6..8 .085 2.16 .020 .024 (opt. 22) 115 - 1.0 1.2 1.5 2.0 .01 - 12K 45V .312 7.92 .085 2.16 .020 .024 (opt. 22) 120 - 1.0 1.2 - - .01 - 15K 50V .344 8.74 .096 2.44 .020 .024 (opt. 22) Stock 125 RW70 (125B RW80) 1.5 1.8 2.0 2.5 .01 - 20K 55V .385 9.78 .096 2.44 .020 .024 (opt. 22) 130 - 1.6 2.0 - - .01 - 22K 65V .530 13.5 .096 2.44 .020 .024 (opt. 22) 133 - 2.0 3.0 3.0 4.0 .005 - 20K 80V .355 9.00 .156 3.96 .031 .024 (opt. 22) Stock 135 RW69 3.0 4.0 4.0 5.0 .005 - 40K 140V .500 12.7 .188 4.78 .031 .024(22), .040(18) 140 RW79 3.0 4.0 4.0 5.0 .005 - 50K 140V .550 14.2 .188 4.78 .031 .040 (opt. 18) 145 - 3.5 4.5 4.5 6.5 .005 - 60K 180V .770 19.6 .188 4.78 .031 .040 (opt. 18) 150 - 3.5 4.5 5.0 7.0 .005 - 60K 150V .500 12.7 .225 5.72 .040 .032 (opt. 20) 155 - 4.0 5.0 6.0 8.0 .005 - 100K 210V .625 15.9 .225 5.72 .040 .032 (opt. 20) 156 - 5.0 6.0 - - .005 - 150K 300V .800 20.3 .250 6.35 .040 .032 (opt. 20) Stock 160 RW74 5.0 7.0 7.0 10 .005 - 200K 400V .875 22.2 .312 7.92 .040 .032 (opt. 20) 165 RW67 6.0 7.5 - - .005 - 220K 450V 1.000 25.4 .312 7.92 .040 .032 (opt. 20) 170 - 7.0 9.0 10 12 .005 - 300K 550V 1.200 30.9 .312 7.92 .040 .032 (opt. 20) 171 - 7.0 8.5 - - .005 - 250K 700V 1.660 42.2 .208 5.28 .031 .040 (opt. 18) 172 - 8.5 10 - - .005 - 400K 900V 2.100 53.3 .225 5.72 .031 .040 (opt. 18) 173 - 9.0 11 12 14 .005 - 400K 650V 1.550 39.4 .300 7.62 .040 .032 (opt. 20) Stock 4 4 175 RW68, 78 10 13 15 18 .005 - 500K 900V 1.720 43.7 .350 8.89 .040 .032 (opt. 20) 176 - 10 12 - - .005 - 500K 800V 1.875 47.6 .300 7.62 .040 .032 (opt. 20) 178 - 13 15 - - .01 - 750K 1150V 2.410 61.2 .350 8.89 .040 .032 (opt. 20) 180 RW56 14 16 16 20 .01 - 800K 1000V 2.100 53.3 .500 12.7 .040 - 185 - 20 25 - - .015 - 1M 1350V 2.800 71.1 .500 12.7 .040 - 186 - 25 30 - - .010 - 1M 1400V 4.060 103 .350 8.89 .040 .032 (opt. 20) 190 - 40 50 - - .025 - 2M 1500V 5.000 127 .500 12.7 .040 - 1 1/2 2 3 4 Working voltage=(PR) , not to exceed max rating (multiply by 0.7 for Opt.X) Allow .032 additional for Opt X, Opt 33, or values<1 Coating overflow onto each lead 2xD typ Performance is typical for Char.U with tol 5 6 7 1%, & is dependent on resis, options, etc. Consult factory for Char.V & tol >1% Military p/ns are given for reference only & do not imply qualification or exact interchangeability Increased range avail Resis value measured 8 9 at 3/81/16 from each end of body Heavier lead gauge option is recommended on low values to enable lower leadwire resis., increased current, & improved TC Lead length applies to bulk packaged units (taped parts 10 generally have shorter leads, refer to taping spec.) Series 100 has dual power rating depending on temp.rise & stability requirements derate 50% to ensure high reliability & operational life stability 4 TYPICAL PERFORMANCE P/N DESIGNATION: 135 - 102 - J B W Operational Life (Char.U) 0.5% (1% on Opt.B & sizes 10W) RCD Type Thermal Shock 0.2% Moisture Resistance 0.2% Options: X, R, V, P, F, ER, E, B, 76, 75, 33, 22, 20, 18 Shock and Vibration 0.1% (leave blank if standard) Overload, 5 Sec 5x rated W 102-156, 10x W 160-190 Resis. Code 1% & tighter tols: 3 signif. digits & multiplier, Dielectric Strength: type 102-130 300V (for 500V specify opt.23) e.g. R100= 0.1, 1R00= 1,1000= 100, 1001= 1K. Dielectric Strength: type 133-190 500V (for 1KV specify opt.33) 2%-10%: 2digits & multiplier (R10= .1, 1R0=1,100=10, Max. Current (not to exceed Resistors with .020lead dia = 11A, 102=1K). Use extra digits as needed: R005, R0075, R012, etc. wattage or voltage rating) .024 =15A, .032 =22A, .040=30A Tolerance: K=10%, J=5%, H=3%, G=2%, F=1%, D=0.5%, TCR: temp coefficient 10 20ppm (5 & 10ppm avail.) C=0.25%, B=0.1%, A=0.05%, Q=0.02%, T=0.01%, V=.005% of resistance element, 1- 9.9 50ppm (10, 20, 30ppm avail.) tol 1% (contact 0.1-.99 90ppm (20, 30, 50 ppm avail.) Packaging: B= Bulk, T= T&R (avail. on type 102 to 176) factory >1%) . 050-.099 300ppm (50, 100, 200ppm avail.) .01 -.049 600ppm (100, 200, 300ppm avail.) Optional TC: 5= 5ppm, 10= 10ppm, 20= 20ppm, 30= 30ppm, 50= 50ppm, 101= 100ppm, 201=200ppm (leave blank if std) Termination: W=RoHS (std), Q= Tin/Lead (leave blank if both acceptable) - - - - RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales rcdcomponents.com FA039H Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 43 % RATED POWERX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for rcd manufacturer: Other Similar products are found below : 630-8R60-FBW 640B-R100-FBW 605B-1R50-FBW CC1-104-KBW PR1-3R3-JBW LVF15-R010-FBW 210-1R00-FBW 635B-3R00-FBW PWLL25-302-JBW 605B-R100-FBW 210-10R0-FBW 610Q2-331-JBW 160-2500-FBW 160-1R00-FBW 135X-800-JBW 135-1500-FBW 235-1001-FBW 610Q-1250-FBW 135-180-JBW 175-5000-FBW 135-5R00-FBW 610-1R00-FBW 160-510-JBW 175-131-JBW 232-1000- FBW PW5-251-JBW PW5-500-JBW RSF1B-4R7-JBW RMF3-103-JBW 135-2500-FBW 135-821-JBW 160-120-JBW 630X-100-JBW LVF15-R040-FBW 135-152-JBW 160-3002-FBW 160-244-JBW 610-5001-FBW 160-1R5-JBW 255-1000-FBW 175-R500-FBW 160-331- JBW 175-2R4-JBW 160-R100-FBW 175-820-JBW PW5-912-JBW 160-121-JBW 610-5R00-FBW 620-103-JBW 125P-151-JBQ