RAC10-05SK/277 Recom Power

D C C S S a O O R R L w E E M M p T T P P O R R a L L p R I I E E A A H r V V l N N A N N i T T r E Wide input range 85-305VAC Features Operating temperature range: -40C to +80C High efficiency over entire load range AC/DC Converter No external components necessary Regulated Household certification IEC/EN60335 Overvoltage category OVCIII (IEC62477-1) Converter RAC10-K/277 140% Peak load capability Description 10 Watt 3 The RAC10-K/277 series are highly efficient PCB-Mount power conversion modules with ultra-low 2 x 1 energy losses even in light load conditions. Built for worldwide usage, the AC/DC units cover an enhanced mains input range of 85VAC up to 305VAC and come with international safety certifications Single and for both industrial and household standards. These AC/DC modules offer fully protected single or dual outputs as well as EMC Class B compliance without the need of any external components. The 140% peak Dual Output power capability makes the RAC10-K/277 series suitable for inductive, high start-up current or nonlinear loads. With a full load temperature range of -40C to +65C, they are ideal for always-on and standby mode operations in process automation, IoT and smart building applications. Selection Guide Part Input Output Output Efficiency Max. Capacitive (1) Number Voltage Range Voltage Current typ. Load VAC VDC mA % F RAC10-3.3SK/277 85-305 3.3 2500 79 10000 22++ RoHSRoHS REACHREACH compliantcompliant compliantcompliant 10 from 1010 from 10 RAC10-05SK/277 85-305 5 2000 82 8000 RAC10-12SK/277 85-305 12 840 84 1500 RAC10-15SK/277 85-305 15 670 85 1000 CERTIFIED EN-60335-1 RAC10-18SK/277 85-305 18 560 85 800 E224736 RAC10-24SK/277 85-305 24 420 84 330 RAC10-12DK/277 85-305 12 420 82 1200 RAC10-15DK/277 85-305 15 340 83 1000 Notes: UL62368-1 certified Note1: Efficiency is tested at 25C with constant resistant mode at full load and 230VAC CSA C22.2 No. 62368-1-14 certified IEC/EN60950-1 certified IEC/EN60335-1 certified IEC/EN62368-1 certified EN62233 certified EN62477-1 certified EN61204-3 compliant Model Numbering CB-Report RAC10- K/277 Output Voltage Single or Dual Output Ordering Examples: RAC10-05SK/277 10 Watt 5Vout Single Output RAC10-24SK/277 10 Watt 24Vout Single Output RAC10-12DK/277 10 Watt 12Vout Dual Output www.recom-power.com REV.: 8/2020 PA-1 O O a P P E a C C S R R n O O Y M M n U D D c O O U U t O C C C C e E E y T T R R H s S SRAC10-K/277 AC/DC Converter Series Specifications (measured Ta= 25C, nominal input voltage (115/230VAC), full load and after warm-up) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter Pi Type nom. Vin= 277VAC 85VAC 277VAC 305VAC (2,3) Input Voltage Range 120VDC 430VDC 115VAC 250mA Input Current 230VAC 210mA 277VAC 190mA 115VAC 15A Inrush Current 230VAC 30A 277VAC 36A No load Power Consumption 150mW 250mW 0.5W 0.3W ErP Standby Mode Conformity Input Power= 1.0W 0.7W (Output Load Capability) 2.0W 1.4W Input Frequency Range 47Hz 63Hz Overload Capability peak duty cycle: 10% TAMB +50C max. 140%/10s Single 0% Minimum Load Dual 10% 115VAC 0.60 Power Factor 230VAC 0.50 277VAC 0.45 Start-up Time 30ms Rise Time 25ms 115VAC 15ms Hold-up time 230VAC 90ms 277VAC 110ms Internal Operating Frequency 100kHz 3.3Vout, 5Vout 60mVp-p (4) Output Ripple and Noise 20MHz BW others 1% of Vout Notes: Note2: The products were submitted for safety files at AC-Input operation Note3: Refer to Line Derating Note4: Measurements are made with a 0.1F MLCC & 10F E-cap in parallel across output. (low ESR) Efficiency vs. Load RAC10-3.3SK/277 RAC10-05SK/277 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 115VAC 115VAC 20 20 230VAC 230VAC 10 10 277VAC 277VAC 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % continued on next page www.recom-power.com REV.: 8/2020 PA-2 Efficiency % Efficiency %