Wide 4:1 input voltage range Features 1.6kVDC isolation DC/DC Converter UL certified Efficiency up to 91% Regulated Six-sided continuous shield Converter No minimum load required RP30-FW Description 30 Watt The RP30-FW series DC/DC converters are designed to meet to UL 60950-1 and to cUL 60950-1. 2 x 1 This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2 x 1 package meets military standards for thermal shock and Single and Dual vibration tolerance. Output Selection Guide (1) (1) Part Number Input Output Output Input Efficiency Max. Capacitive (2) Voltage Range Voltage Current Current typ. Load VDC VDC mA mA % F (3,4) RP30-243.3SFW 9-36 3.3 7500 1199 86 20000 (3,4) RP30-2405SFW 9-36 5 6000 1420 88 14400 (3,4) RP30-2412SFW 9-36 12 2500 1404 89 3000 (3,4) RP30-2415SFW 9-36 15 2000 1404 89 2000 (3,4) RP30-483.3SFW 18-75 3.3 7500 600 86 20000 (3,4) RP30-4805SFW 18-75 5 6000 710 88 14400 (3,4) RP30-4812SFW 18-75 12 2500 694 90 3000 (3,4) RP30-4815SFW 18-75 15 2000 687 91 2000 (3,4) RP30-2405DFW 9-36 5 3000 1420 88 3000 E196683 (3,4) RP30-2412DFW 9-36 12 1250 1437 87 2000 (3,4) RP30-2415DFW 9-36 15 1000 1437 87 1300 (3,4) RP30-4805DFW 18-75 5 3000 710 88 3000 (3,4) RP30-4812DFW 18-75 12 1250 710 88 2000 (3,4) RP30-4815DFW 18-75 15 1000 710 88 1300 Notes: UL60950-1 certified Note1: Maximum values at nominal input voltage and full load EN55032 compliant Note2: Max. Cap load is tested at minimum input and constant resistive load Model Numbering RP30- FW/ (4) nom. Input Voltage Package (3) Output Voltage CTRL Logic Single or Dual Notes: Note3: no suffix for CTRL function with positive logic (1=ON, 0=OFF) add suffix N for CTRL function with negative logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink with clips Ordering Examples RP30-2405SFW = 24V input, 5V output, single, positive Logic CTRL pin RP30-4812DFW/N-HC = 48V input, 12V output, dual, negative Logic CTRL pin, Heat-sink premounted www.recom-power.com REV.: 3/2019 PD-175 RP30-FW DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Filter Pi-Type nom. Vin = 24VDC 9VDC 24VDC 36VDC Input Voltage Range nom. Vin = 48VDC 18VDC 48VDC 75VDC nom. Vin = 24VDC 50VDC Input Surge Voltage 100ms max. nom. Vin = 48VDC 100VDC DC-DC ON 9VDC nom. Vin = 24VDC DC-DC OFF 8VDC Under Voltage Lockout (UVLO) DC-DC ON 18VDC nom. Vin = 48VDC DC-DC OFF 16VDC Output Voltage Trimming refer to OUTPUT VOLTAGE TRIMMING -10% +10% (5) Input Reflected Ripple Current 20mAp-p Minimum Load 0% Power up 30ms Start-up Time ON/OFF CTRL 30ms V DC-DC ON Open or 3.0VDC < < 12VDC CTRL Positive Logic V DC-DC OFF Short or 0VDC < < 1.2VDC CTRL (6) ON/OFF CTRL V DC-DC ON Short or 0VDC < < 1.2VDC CTRL Negative Logic V DC-DC OFF Open or 3.0VDC < < 12VDC CTRL DC-DC ON -0.5mA +0.5mA Input Current of CTRL pin DC-DC OFF 3mA Standby Current Internal Operating Frequency 387kHz 430kHz 473kHz measured at 20MHz BW 3.3Vout, 5Vout 100mVp-p Ripple and Noise with a 1F/50V MLCC 12Vout, 15Vout 150mVp-p Notes: Note5: Simulated source impedance of 12H. 12H inductor in series with +Vin Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin RP30-2405SFW Efficiency vs. Input Voltage full load Efficiency vs. Output Current 95 95 90 90 85 80 85 75 70 80 65 60 55 9Vin 50 70 24Vin 45 36Vin 40 65 18 20 22 24 26 28 30 32 34 36 10 20 30 40 50 60 70 80 90 100 Output Current % Input Voltage VDC continued on next page www.recom-power.com REV.: 3/2019 PD-2 Efficiency % Efficiency %