MP2505
THRU
MP2510
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Amperes
FEATURES
* Superior thermal desing
* 300 amperes surge rating
//
* 1/4 universal faston terminal
* Hole thru for # 10 screw
MECHANICAL DATA
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
MP-25
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
MP-25W
For capacitive load, derate current by 20%.
o
MAXIMUM RATINGS (At TA = 25 C unless otherwise noted)
RATINGS SYMBOL MP2505 MP251 MP252 MP254 MP256 MP258 MP2510 UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts
o
Maximum Average Forward Rectified Output Current at Tc = 55 C IO 25.0 Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
IFSM 300 Amps
superimposed on rated load (JEDEC method)
RMS isolation voltage from case to lead 2500 Volts
VISO
Typical Thermal Resistance (from junction to case) R qJC 1.9
0
C/W
R qJA
Typical Thermal Resistance (from junction to ambient) 19
0
TJ,TSTG -55 to + 150 C
Operating and Storage Temperature Range
o
ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted)
CHARACTERISTICS SYMBOL MP2505 MP251 MP252 MP254 MP256 MP258 MP2510 UNITS
VF
Maximum Forward Voltage Drop per element at 12.5A DC 1.1 Volts
o
5.0 uAmps
@TA = 25 C
Maximum Reverse Current at Rated
IR
o
DC Blocking Voltage per element @TC = 100 C 0.5 mAmps
2008-10
NOTE: 1. Suffix W for wire type
REV: A
2. Fully ROHS compliant,100% Sn plating(Pb-free).( )
RATING AND CHARACTERISTIC CURVES MP2505 THRU MP2510
FIG. 2 - TYPICAL FORWARD CURRENT
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT DERATING CURVE
500
25
8.3ms Single Half Sine-Wave
(JEDEC Method)
20
400
15
300
200 10
60 Hz RESISTIVE OR
100
5
INDUCTIVE LOAD
0 0
1 2 4 6 8 10 20 40 60 80100 0 50 100 150
175
NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, ( )
FIG. 3- TYPICAL INSTANTANEOUS FORWARD FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
CHARACTERISTICS
100 10
10
1.0
T = 25
J
1.0
TJ = 25
Pulse Width = 300us
1% Duty Cycle
.1
.1
.01 .01
1.2 1.3
.6 .7 .8 .9 1.0 1.1 0 20 40 60 80 100 120 140
INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAG)E, ( %
( ) ( )
Max. .311 7.9 MAX. .311 7.9
.480 (12.2)
.425 (10.8) ( )
MIN. .787 20.0
( )
.043 1.1
( )
.039 1.0
1.142 (29)
1.102 (28) Hole for # 10 screw
( ) 1.142 (29) Hole for # 10 screw
.673 17.1
Min f.200 (5.08)
( ) 1.102 (28)
.634 16.1 Min .200 (5.08)
( )
.583 (14.8) .32 x .252 0.81 x 6.35
.732 (18.6)
.543 (13.8)
.693 (17.6)
MP-25 MP-25W
INSTANTANEOUS FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A)
.732 (18.6)
.693 (17.6)
.673 (17.1)
( )
.634 16.1
( )
1.142 29
( )
1.102 28
INSTANTANEOUS REVERSE CURRENT, (uA) AVERAGE FORWARD CURRENT, (A)
( )
.732 18.6
( )
.693 17.6
.469 (11.9)
.429 (10.9)
.142 (29.0)
.102 (28.0)