80C86 Datasheet January 9, 2009 FN2957.3 CMOS 16-Bit Microprocessor Features The Intersil 80C86 high performance 16-bit CMOS CPU is Compatible with NMOS 8086 manufactured using a self-aligned silicon gate CMOS Completely Static CMOS Design process (Scaled SAJI IV). Two modes of operation, - DC 8MHz (80C86-2) minimum for small systems and maximum for larger applications such as multiprocessing, allow user Low Power Operation configuration to achieve the highest performance level. Full - lCCSB 500mA Max TTL compatibility (with the exception of CLOCK) and - ICCOP . 10mA/MHz Typ industry standard operation allow use of existing NMOS 1MByte of Direct Memory Addressing Capability 8086 hardware and software designs. 24 Operand Addressing Modes Ordering Information Bit, Byte, Word and Block Move Operations TEMP. 8-Bit and 16-Bit Signed/Unsigned Arithmetic PART RANGE PKG. PART NUMBER MARKING (C) PACKAGE DWG. - Binary, or Decimal - Multiply and Divide CP80C86-2 CP80C86-2 0 to +70 40 Ld PDIP E40.6 CP80C86-2Z CP80C86-2Z 0 to +70 40 Ld PDIP* E40.6 Wide Operating Temperature Range (Note) (Pb-free) - C80C86 0C to +70C - M80C86 . -55C to +125C MD80C86-2/883 MD80C86-2/883 -55 to +125 40 Ld CERDIP F40.6 MD80C86-2/B MD80C86-2/B -55 to +125 40 Ld CERDIP F40.6 Pb-Free Available (RoHS Compliant) 8405202QA 8405202QA -55 to +125 40 Ld CERDIP F40.6 (SMD) *Pb-free PDIPs can be used for through-hole wave solder processing only. They are not intended for use in Reflow solder processing applications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2002, 2006, 2009. All Rights Reserved All other trademarks mentioned are the property of their respective owners.80C86 Pinout 80C86 (40 LD PDIP, CERDIP) TOP VIEW MAX (MIN) GND 1 40 V CC AD14 2 39 AD15 AD13 3 38 A16/S3 AD12 4 37 A17/S4 AD11 5 36 A18/S5 AD10 6 35 A19/S6 AD9 7 34 BHE/S7 AD8 8 33 MN/MX AD7 9 32 RD AD6 10 31 RQ/GT0 (HOLD) AD5 11 30 RQ/GT1 (HLDA) AD4 12 29 LOCK (WR) AD3 13 28 S2 (M/IO) AD2 14 27 S1 (DT/R)) AD1 15 26 S0 (DEN) AD0 16 25 QS0 (ALE) NMI 17 24 QS1 (INTA) INTR 18 23 TEST CLK 19 22 READY GND 20 21 RESET FN2957.3 2 January 9, 2009