DATASHEET DG211 FN3118 Rev 5.00 SPST 4-Channel Analog Switch November 19, 2007 The DG211 is a low cost, CMOS monolithic, Quad SPST Features analog switch. It can be used in general purpose switching Switches 15V Analog Signals applications for communications, instrumentation, process control and computer peripheral equipment and provides TTL Compatibility true bi-directional performance in the ON condition and Logic Inputs Accept Negative Voltages blocks signals to 30V in the OFF condition. P-P r (Max) . 175 ON Ordering Information Pb-Free Available (RoHS Compliant) PART PART TEMP. PKG. Functional Block Diagram NUMBER MARKING RANGE (C) PACKAGE DWG. DG211 DG211CJ DG211CJ 0 to +70 16 Ld PDIP E16.3 S 1 DG211CJZ DG211CJZ 0 to +70 16 Ld PDIP* E16.3 (Note) (Pb-free) IN 1 D DG211CY** DG211CY 0 to +70 16 Ld SOIC M16.15 1 S 2 DG211CYZ** DG211CYZ 0 to +70 16 Ld SOIC M16.15 IN (Note) (Pb-free) 2 D 2 DG211CVZ** DG211 CVZ 0 to +70 16 Ld TSSOP M16.173 S (Note) (Pb-free) 3 IN 3 *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing D 3 applications. S 4 **Add -T suffix for tape and reel. Please refer to TB347 for details IN on reel specifications. 4 NOTE: These Intersil Pb-free plastic packaged products employ D 4 special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL TRUTH TABLE classified at Pb-free peak reflow temperatures that meet or exceed LOGIC DG211 the Pb-free requirements of IPC/JEDEC J STD-020. 0ON 1OFF Pinout Logic 0 0.8V, Logic 1 2.4V DG211 (16 LD PDIP, SOIC, TSSOP) TOP VIEW 1 16 IN IN 2 1 D 2 15 D 1 2 S 3 14 S 1 2 4 13 V- V+ (SUBSTRATE) 5 12 GND V (+5V) L S 6 11 S 4 3 10 D 7 D 4 3 8 9 IN IN 4 3 FN3118 Rev 5.00 Page 1 of 8 November 19, 2007 NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tscDG211 Schematic Diagram 1 DG211 ( / AS SHOWN) 4 TTL IN -15V GND +15V -15V +5V V- V L -15V +15V IN OUT FN3118 Rev 5.00 Page 2 of 8 November 19, 2007