EL7156 Data Sheet September 1, 2015 FN7280.4 High Performance Pin Driver Features The EL7156 high performance pin driver with three-state is Clocking speeds up to 40MHz suited to many ATE and level-shifting applications. The 3.5A 15ns t /t at 2000pF C R F LOAD peak drive capability makes this part an excellent choice 0.5ns rise and fall times mismatch when driving high capacitance loads. 0.5ns t -t prop delay mismatch ON OFF The output pin OUT is connected to input pins VH or VL 3.5pF typical input capacitance respectively, depending on the status of the IN pin. When the OE pin is active low, the output is placed in the three-state 3.5A peak drive mode. The isolation of the output FETs from the power Low ON-resistance of 3.5 supplies enables VH and VL to be set independently, High capacitive drive capability enabling level-shifting to be implemented. Related to the EL7155, the EL7156 adds a lower supply pin VS- and makes Operates from 4.5V to 16.5V VL an isolated and independent input. This feature adds Pb-free plus anneal available (RoHS compliant) applications flexibility and improves switching response due to the increased enhancement of the output FETs. Applications This pin driver has improved performance over existing pin ATE/burn-in testers drivers. It is specifically designed to operate at voltages Level shifting down to 0V across the switch elements while maintaining good speed and ON-resistance characteristics. IGBT drivers CCD drivers Available in the 8 Ld SOIC and 8 Ld PDIP packages, the EL7156 is specified for operation over the full -40C to Pinout +85C temperature range. EL7156 (8 LD PDIP, SOIC) TOP VIEW VS+ 1 8 VH L OE 2 O 7 OUT G I IN 3 6 VL C GND 4 5 VS- Ordering Information PART NUMBER PART MARKING TAPE & REEL PKG PKG. DWG. EL7156CNZ (Note) EL7156CN Z - 8 Ld PDIP* (Pb-free) MDP0031 (No longer available, recommended replacement: EL7156CSZ) EL7156CSZ (Note) 7156CSZ - 8 Ld SOIC (Pb-free) MDP0027 EL7156CSZ-T7 (Note) 7156CSZ 7 8 Ld SOIC (Pb-free) MDP0027 EL7156CSZ-T13 (Note) 7156CSZ 13 8 Ld SOIC (Pb-free) MDP0027 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Intersil (and design) is a registered trademark of Intersil Americas LLC Copyright Intersil Americas LLC 2003, 2005, 2007, 2015. All Rights Reserved All other trademarks mentioned are the property of their respective owners.EL7156 Absolute Maximum Ratings (T = +25C) Thermal Information A Supply Voltage (V + to V -) .+18V Ambient Operating Temperature -40C to +85C S S Input Voltage . V - -0.3V, V +0.3V Operating Junction Temperature +125C S S Continuous Output Current 200mA Power Dissipation see curves Storage Temperature Range -65C to +150C Pb-free reflow profile see link below