HXR8204 28G Quad TIA+PA Receiver Array Product Brief General Description Features -12 The HXR8204 Transimpedance Limiting 60 App receiver sensitivity for 10 BER at Amplifier array is a member of IDTs family of 28Gbps Optical Receiver Transmitter Array (ORTA) Better than 2.4 mA overload PP products targeted at the parallel optical links 126 mW per channel power consumption market. Together with a PIN detector array or Adjustable output swing size and pre- discrete detectors, high-capacity, high- emphasis in limiting mode and signal detect availability optical links can be designed for threshold telecom and datacom applications. Independent, per channel RSSI The 3.3V SiGe device integrates the trans- Optimized for isolated and common cathode photo-detector arrays from multiple impedance pre-amplifier, the limiting post- amplifier, and a versatile CML output stage for vendors four optical channels. Control lines accessible on both sides of chip QSFP MSA compliance Applications Ordering Information 100G Ethernet SR4 modules Part Temp Range Pin-Package 100G Ethernet AOC Bare Die* HXR8204-DNT 0C to +85C InfiniBand EDR 100G transceivers 1.975mm x 1.6mm HXR8204-EVB Room temp Evaluation Board InfiniBand EDR 100G active cables *Die Design Size Actual die size may be slightly larger Proprietary multi-channel optical modules For price, delivery schedules, and to place orders, please contact IDT: www.IDT.com/go/sales Device Diagram Figure 1: Device diagram 2017 Integrated Device Technology, Inc. 1 May 18, 2017 Corporate Headquarters Sales Tech Support 6024 Silver Creek Valley Road 1-800-345-7015 or 408-284-8200 www.IDT.com/go/support San Jose, CA 95138 Fax: 408-284-2775 www.IDT.com www.IDT.com/go/sales DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as IDT) reserve the right to modify the products and/or specifications described herein at any time, without notice, at IDT s sole discretion. Performance specifications and operati ng parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of a ny kind, whether express or implied, including, but not limited to, the suitability of IDT s products for any particular purpose, an implied warranty of merchantability, or non -infringement of the intellectual property rights of others. This document is presented o nly as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated Device Technology, Inc. All rights reserved.