BH76361FV-E2

High-performance video signal Switcher Series Video Drivers with Built-in Low Voltage operation Single Video Switchers High-performance System video Driver Series Video Drivers with Built-in Input Selection SW BH76330FVM, BH76331FVM, BH76360FV, BH76361FV High-performance video signal Switcher Series Wide Band Low Voltage operation Single Video Switchers No.09065EAT01 BH76332FVM, BH76333FVM, BH76362FV, BH76363FV INDEX Video Drivers with Built-in Low Voltage operation Single Video Switchers BH76330FVM (3input 1output Video Switch)P2 BH76331FVM (3input 1output Video Switch)P2 BH76360FV (6input 1output Video Switch)P17 BH76361FV (6input 1output Video Switch)P17 Wide Band Low Voltage operation Single Video Switchers BH76332FVM (3input 1output Video Switch)P2 BH76333FVM (3input 1output Video Switch)P2 BH76362FV (6input 1output Video Switch)P17 BH76363FV (6input 1output Video Switch)P17 www.rohm.com 2009.04 - Rev.A 1/32 2009 ROHM Co., Ltd. All rights reserved. BH76330FVM, BH76331FVM, BH76360FV, BH76361FV, Technical Note BH76332FVM, BH76333FVM, BH76362FV, BH76363FV Line-up of products with built-in video amplifier and video driver 3-input, 1-output video switch BH76330FVM, BH76331FVM, BH76332FVM, BH76333FVM General BH76330FVM, BH76331FVM, BH76332FVM, and BH76333FVM are video signal switching ICs, each with three inputs and one circuit input, which feature wide dynamic range and frequency response. Since these ICs can be used with low voltage starting at VCC = 2.8 V, they are applicable not only in stationary devices but also in mobile devices. This product line-up supports a broad range of input signals, depending on whether or not a 6-dB video amplifier and video driver are included and what combination of sync tip clamp type and bias (resistor termination) type inputs are used. Features 1) Able to use a wide range of power supply voltage, from 2.8 V to 5.5 V 2) Wide output dynamic range 3) Excellent frequency response (BH76330FVM and BH76331FVM: 100 kHz/10 MHz 0 dB Typ. , BH76332FVM and BH76333FVM: 100 kHz/30 MHz 0 dB Typ. ) 4) No crosstalk between channels (Typ. -65 dB, f = 4.43 MHz) 5) Built-in standby function, circuit current during standby is 0 A (Typ.) 6) Sync tip clamp input (BH76330FVM, BH76332FVM) 7) Bias input (Zin = 150 k) (BH76331FVM, BH76333FVM) 8) 6-dB amp and 75 driver are built in (BH76330FVM, BH76331FVM) 9) Enables two load drivers when using output coupling capacitor (BH76330FVM, BH76331FVM) 10) Able to be used without output coupling capacitor (BH76330FVM) 11) MSOP8 compact package Applications Input switching in car navigation systems, TVs, DVD systems, etc. Line-up BH76330FVM BH76331FVMBH76332FVMBH76333FVM Supply voltage 2.8 V to 5.5 V Amp gain 6 dB -0.1 dB Video driver Included Frequency response 100 kHz/10 MHz, 0 dB (Typ.) 100 kHz/30 MHz, 0 dB (Typ.) Sync tip Bias Sync tip Bias Input type clamp (Zin = 150 k) clamp (Zin = 150 k) Absolute maximum ratings (Ta = 25) Parameter Symbol Limits Unit Supply voltage VCC 7.0 V Power dissipation Pd 470 1 mW Input voltage range V 0 to VCC+0.2 V IN Operating temperature -40 to +85 Topr range Storage temperature -55 to +125 Tstg range 1 * When used while Ta = 25, 4.7 mW is dissipated per 1 Mounted on 70 mm x 70 mm x 1.6 mm glass epoxy board Operation range (Ta = 25) Parameter Symbol Min. Typ. Max Unit Supply voltage VCC 2.8 5.0 5.5 V www.rohm.com 2009.04 - Rev.A 2/32 2009 ROHM Co., Ltd. All rights reserved.