New Product Bulletin Wireless LAN Module with Flash Memory BP3599 Enable wireless LAN communication by simply connecting to existing sets Product Outline The BP3599 takes the IEEE802.11b/g/n BP3591 wireless LAN module with built-in antenna and flash memory. In addition, the antenna design is identical to the BP3591, eliminating the need for high-frequency circuitry, and the BP3599 is pin-compatible with the BP3591, making replacement easy. The internal flash memory comes pre-loaded with firmware including TCP/IP stack, and the module is already certified* for use in Japan and the US, enabling implementation possible. *Please inquire regarding applicable radio laws in other countries All-in-one wireless LAN module Specifications IEEE802.11b,IEEE802.11g Wireless LAN Standards Built-in antenna eliminates Connect an external antenna Integrated flash memory IEEE802.11n,IEEE802.11i the need for high-frequency via coaxial connector includes firmware designs Host Interface UART (~921600bps) Integrated Flash Memory 4Mbit serial flash memory MAC address information M2 screw holes Transmission Frequency 2,400MHz to 2,483.5MHz (ch1-ch13) contained in the macro for mounting QR code IEEE802.11b : 15dBm2dB Transmission Power IEEE802.11g : 13dBm2dB Complies with applicable radio laws in Japan and IEEE802.11n : 12dBm2dB the US 0.5mm-pitch 34pin IEEE802.11b : 1-11Mbps low profile connector Communication Rate IEEE802.11g : 6-54Mbps MAC address included before IEEE802.11n : 6.5-72.2Mbps 24mm shipment Access Method CSMA/CA Front Rear Access Mode Infrastructure/Ad hoc Security 64bit/128bit WEP, TKIP, AES Firmware, including the TCP/IP stack, is pre-loaded in the internal flash memory. Stations and Supply Voltage 3.3V access points are written in Regions 1 and 2, respectively, making it easy to change operating Continuous transmission : 300mA typ. modes by switching the FLASH SEL pin from High to Low and vice versa. Current Consumption Reception : 200mA Typ. Sleep : 500A Temperature : -40 to +85C Operating Environment Humidity: <85% (No condensation) Firmware with TCP/IP stack WPS (Wi-Fi Protected Setup) PIN/PBC methods Radio Act Certification Japan and the US (Japan only when using external antenna) BP3599 Flash Memory Configuration Options Firmware Included A dedicated 2.54mm-pitch conversion BP3591 board is available, while adding an BP3580 OSC optional external antenna improves communication distance and enables 3.3V LDO mounting in sets with metallic housings LDO BB/MAC RF for broader applicability. HOST Dedicated Conversion Board External Antenna MCU EEPROM Applications Industrial equipment, sensor networks, home networks Wireless LAN routers and peripheral devices The firmware written in the flash memory includes protocols essential for wireless LAN communication, such as WPA-PSK, WPA2-PSK, and WPS. In addition, the pre-loaded Smartphones and the like TCP/IP stack enables both wireless LAN and network processing, making it easy to add IP Systems that could not support wireless LAN due to insufficient MCU communication to sets that previously could not support wireless LAN due to insufficient Systems that could not support wireless LAN due to costs microcontroller processing capability or other restrictions. Support: