106022

Hole saws HSS bi-metal hole saws, with varied toothing Cutting edges: HSS Suitable for unalloyed steel (up to 700 N/mm Jacket: special steel strength), non-ferrous and light metals, plas- 1 Cutting depth: up to max. 38 mm (1 /) tics, plasterboard and light building boards, 2 Cutting teeth: varied toothing fibreboard, plywood and wood. Right-hand cutting Packing unit: individual carton Through Tube For Article no. Price / 1.9 1.9 mm inch dimensions PG dimensions inch arbor holders each 9 14 / A1 / A4 / A5 106 014 16 5 Characteristics: 16 / ~ PG 9 A1 / A4 / A5 106 016 8 17 A1 / A4 / A5 106 017 3 3 High rotational precision 19 / ~ PG 11 / A1 / A4 / A5 106 019 4 8 Sturdy construction 20 A1 / A4 / A5 106 020 Hole saw and shank in two parts, so hole 21 ~ PG 13,5 A1 / A4 / A5 106 021 7 1 saws of different diameters can be exchanged 22 / / A1 / A4 / A5 106 022 8 2 15 and fitted more rapidly 24 /16 ~ PG 16 A1 / A4 / A5 106 024 25 1 A1 / A4 / A5 106 025 A1, A2, A5, A6 arbor with hexagonal shank 1 27 1 / A1 / A4 / A5 106 027 and A7 arbor with SDS-plus shank 16 3 28 1 / A1 / A4 / A5 106 028 A4 arbor with cylindrical shank 32 1 3 29 1 /8 ~ PG 21 /4 A1 / A4 / A5 106 029 Positive chipping and cutting angles ensure 3 30 1 / A1 / A4 / A5 106 030 16 more aggressive cutting 1 32 1 / A2 / A6 / A7 106 032 Varied toothing ensures: 4 33 A2 / A6 / A7 106 033 - smoother cutting 3 35 1 /8 1 A2 / A6 / A7 106 035 - less effort 36 A2 / A6 / A7 106 036 - less vibration and heat production 37 PG 29 A2 / A6 / A7 106 037 during cutting 1 38 1 / A2 / A6 / A7 106 038 2 - up to three times longer tool life 40 A2 / A6 / A7 106 040 The HSS teeth are welded onto a jacket of 5 41 1 / A2 / A6 / A7 106 041 8 special steel 11 43 1 / A2 / A6 / A7 106 043 16 Good chip removal 3 1 44 1 / 1 / A2 / A6 / A7 106 044 4 4 Slots in the jacket side assist removal of 13 46 1 /16 A2 / A6 / A7 106 046 cutouts 7 48 1 / ~ PG 36 A2 / A6 / A7 106 048 8 Exchangeable centring drill 1 51 2 1 / A2 / A6 / A7 106 051 2 Unsuitable for percussion-drill operation 52 A2 / A6 / A7 106 052 Only slight pressure required to start drilling 1 54 2 /8 PG 42 A2 / A6 / A7 106 054 Drill with light, steady pressure 55 A2 / A6 / A7 106 055 Avoid pendulum movements while drilling 1 57 2 / A2 / A6 / A7 106 057 4 Observe table of drilling speeds 59 A2 / A6 / A7 106 059 Use prescribed cooling agents 3 60 2 /8 ~ PG 48 A2 / A6 / A7 106 060 63 A2 / A6 / A7 106 063 RUKO HSS bi-metal hole saws can be used 1 64 2 / 2 A2 / A6 / A7 106 064 2 in hand and pillar drills. When employing pillar 65 A2 / A6 / A7 106 065 drills, use manual advance only. 5 67 2 /8 A2 / A6 / A7 106 067 68 A2 / A6 / A7 106 068 Also suitable for other makes of drill. 3 70 2 / A2 / A6 / A7 106 070 4 Prices without arbor. 7 73 2 / A2 / A6 / A7 106 073 8 1 76 3 2 /2 A2 / A6 / A7 106 076 1 79 3 / A2 / A6 / A7 106 079 8 1 83 3 / A2 / A6 / A7 106 083 4 3 86 3 / A2 / A6 / A7 106 086 8 1 89 3 /2 A2 / A6 / A7 106 089 5 92 3 / 3 A2 / A6 / A7 106 092 8 3 95 3 / A2 / A6 / A7 106 095 4 7 98 3 / A2 / A6 / A7 106 098 8 102 4 A2 / A6 / A7 106 102 1 105 3 / A2 / A6 / A7 106 105 2 1 108 4 / A2 / A6 / A7 106 108 4 3 111 4 / A2 / A6 / A7 106 111 8 1 114 4 /2 4 A2 / A6 / A7 106 114 3 121 4 / A2 / A6 / A7 106 121 4 127 5 A2 / A6 / A7 106 127 1 140 5 / A2 / A6 / A7 106 140 2 152 6 A2 / A6 / A7 106 152 5 160 6 / A2 / A6 / A7 106 160 16 5 168 6 / A2 / A6 / A7 106 168 8 177 A2 / A6 / A7 106 177 9 210 8 / A2 / A6 / A7 106 200 32 - 186 -X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for ruko manufacturer: Other Similar products are found below : 214214 214100 214036 202040E 208040 214049 214053 214096 214140 101021 101062 232-040 102146 102303E 241 001 242-207 102114E 102411 245001 242-205 116048 102771 102785 244201 A215214RO A215215RO 217-020 214057 202030E 214034 214044 214081 215030 232025 237-030 241-010 241-101 244200 A214215RO 241 102 217-315 214047 208050 214062 230025 102-114 A101038 109220 270015 245002