BNC7T-J-P-HN-ST-TH2D Samtec

75 BNC TO 12 GHz BNC END 1 END 2 OVERALL SERIES - - - Cable Assemblies CONNECTOR CONNECTOR LENGTH RFC6T, RFA6T, RFB6T, RF179 RFC6T* 74SP3 XXXX = 12G-SDI, Belden 4694R Cable = 75 BNC Straight Plug = Overall Length in millimeters RFA6T D4SP3 = RG 6 Cable = 75 BNC Die Cut Straight Plug 0300 (300 mm) 11.81 minimum (RFA6T, RFB6T, RFC6T) RFB6T 74BJ3 = Belden 1694A Cable = 75 BNC Bulkhead Jack (RF179 only) 0100 (100 mm) 3.94 minimum RF179 74RP3 (RF179) = RG 179 Cable = 75 BNC Right-angle Plug (RFA6T, RFB6T, RFC6T only) ALSO AVAILABLE 75 : DIN 1.0/2.3, HD-BNC = RFA6T, RFB6T, RFC6T 75 : DIN 1.0/2.3, SMB, MCX, MMCX = RF179 *Designed to meet SMPTE 2082 12G-SDI specifications. BNC Cable Connectors CONNECTORS FOR INDUSTRY STANDARD CABLES BNC7T-CA BNC7T-P-C-GN-ST-CA3 Machined, RG 179 Cable BNC7T-P-C-GN-RA-CA3 Machined, RG 179 Cable *Machined, RG 6, Belden 1694A BNC7T-P-C-GN-ST-CA6 or Belden 4694R Cable *Machined, RG 6, Belden 1694A BNC7T-P-C-GN-RA-CA6 or Belden 4694R Cable BNC7T-J-C-GN-ST-BH3 Machined, Bulkhead, RG 179 Cable P-C = Cable Plug J-C = Cable Jack BNC7T- P-C-GN-ST-CA3D Die Cast, RG 179 Cable GN = Plating (10 Gold on contact, Nickel on outer contact and shell) Supplied with pins, washers, ST = Straight BNC7T-P-C-GN-ST-CA6D Die Cast, RG 179 Cable nuts, gaskets and ferrules. RA = Right-angle See website for dimensions. *Designed to meet SMPTE 2082 12G-SDI specifications. DIE CAST MACHINED (21.62) .851 (21.70) .854 (29.80) 1.173 (17.50) (6.85) (9.65) (14.50) .689 (14.48) C (2.70) .106 DIA .380 .270 .571 Hex570 DIA CA3D CA6D PSTCA3 & PST CA6 JSTBH3 TERMINATION C (DIA) CA3 (2.70) .106 CA6 (6.85) .207 Note: Additional plating options available on Cable Assemblies, Cable Connectors and Board Connectors. Contact RFGroup samtec.com F-221 samtec.com/BNC Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.75 DIE CAST BNC TO 12 GHz BNC BNC7T GENDER TYPE PLATING ORIENTATION TERMINATION - - - - - Board Connectors BNC7T-TH, BNC7T-BH, BNC7T-BM, BNC7T-EM J P GN ST TH2D = Jack = PCB = 10 (0.25 m) = Straight = Tall Through-hole Mount Gold contact, Die Cast Cable Mates: 100 (2.54 m) (ST only) RA RF179, RFA6T, RFB6T, Nickel Shell = Right-angle RFC6T, GRF7H-C Bulkhead/Panel BH2D* Mount = Low-Profile Die Cast Bulkhead Through-hole (RA only) BM1D* = Low-Profile Die Cast Bulkhead (15.40) (34.29) 1.350 Mixed Technology (25.48) 1.003 .606 for (1.60 mm) .062 PCB (9.65) (10.15) (-RA only) .380 (9.65) .400 DIA .380 DIA BM2D* = Low-Profile RABM1D Die Cast Bulkhead (BALANCED FOR PICK-AND-PLACE) Mixed Technology STEM1D & STEM2D for (3.18 mm) .125 PCB (-RA only) (9.65) .380 (29.00) 1.142 DIA EM1D* = Edge Mount Die Cast (9.65) (10.80) Bulkhead/Panel Mount .380 Notes: (13.90) (13.41) .425 DIA .547 .528 for (1.60 mm) .062 PCB Contact RFGroup samtec.com (23.50) (ST only) for 12G-SDI PCB mount launch .925 characteristics. EM2D* RABH2D Designed to meet SMPTE 2082 = Edge Mount Die Cast 12G-SDI specifications. Bulkhead/Panel Mount STTH2D for (2.40 mm) .093 PCB Additional plating options (ST only) available on Board Connectors. Contact RFGroup samtec.com *Lock washers & knurled nuts supplied with bulkhead/panel mount options 75 MACHINED BNC TO 12 GHz BNC GENDER TYPE PLATING ORIENTATION TERMINATION BNC7T - - - - - Board Connectors BNC7T-TH, BNC7T-BH, BNC7T-EM J P GN ST TH1 = Jack = PCB = 10 (0.25 m) = Straight = Standard Cable Mates: Mount Gold contact, Through-hole RF179, RFA6T, RFB6T, 100 (2.54 m) (ST only) RA Nickel Shell RFC6T, GRF7H-C = Right-angle Bulkhead/Panel BH1* Mount = Standard Bulkhead Through-hole (RA only) EM1* (10.92) = Edge Mount (9.65) (25.48) 1.003 .430 .380 Bulkhead/Panel Mount DIA for (1.60 mm) .062 PCB (9.65) (12.70) (ST only) .380 .500 DIA (18.00) .709 EM2* = Edge Mount STEM1 & STEM2 Bulkhead/Panel Mount for (2.40 mm) .093 PCB STTH1 (ST only) (32.75) 1.289 Notes: Contact RFGroup samtec.com for 12G-SDI PCB mount launch (21.00) .827 characteristics. Designed to meet SMPTE 2082 12G-SDI specifications. *Lock washers & knurled nuts supplied with bulkhead/panel Additional plating options mount options available on Board Connectors. RABH1 Contact RFGroup samtec.com F-221 samtec.com/BNC Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.