F-213-1 FFSD20S10.0001N (1,27 mm) .050 FFMD20T02.0001NR FFSD, FFMD SERIES TIGER EYE FLAT IDC WIRE CABLES SPECIFICATIONS OTHER TYPE NO. PINS END OVERALL OPTION 01 OPTION STRIP PER ROW OP TION LENGTH Mates with: FTS, FTSH, EHF, SHF, ESHF For complete speci cations see www.samtec.com FFSD XX.XX FFSD 06, 11, 12, 15 Insulator Ma te ri al: = Assembled Length (FFSD only) PBT Assembled Length Contact: in INCHES ( .130 ) BeCu 2 inches minimum 04, 05 08,10, N Plating: = Notch 10 (0,25 m) Au over 50 13, 17, 20, 25 Polarization (1,27 m) Ni on contact area (Call Samtec for other sizes) Sn over 50 (1,27 m) Ni (FFSD only) on balance Wire: 30 AWG Current Rating: Leave blank 0.5A per contact Transfer End for S and D Operating Temp Range: = Single End = = Double End S D T (FFMD only) End Options. -40C to +105C For T End Option Lead Size Accepted: (0,41 mm) .016 SQ Specify N Contact Re sis tance: (Socket has 15 m notch polarization) Insertion Depth: (FFMD only) (2,64 mm) .104 to (3,17 mm) .125 Insertion Force: (Single contact only) 5 oz (1,39 N) avg. Reverse Daisy Strain Outside Withdrawal Force: = = = = Reverse = RW D XX SR R O Relief Wiring Chain Reverse (Single contact only) 3 oz (0,83 N) avg. XX RoHS Compliant: Yes 2 (Mates only with 1/8 min. ESHF Series) Note: This Series is No. of positions x non-standard, non-returnable. 3 (1,27) .050 + (8,00) .315 Requires DXX 01 3 Middle = SPECIFICATIONS M Reverse 4 minimum 02 Mates with: FLE*, SFMC*, Blue or black wire Not available with opposite position 1. Transfer End Option O, M, R or DXX 12 Requires DXX 3 Mates with: FTS, FTSH, EHF, SHF, ESHF Strain relief option For complete speci cations see www.samtec.com FFMD = Socket Strip = Terminal Strip FFSD FFMD FFMD Insulator Ma te ri al: Black Glass Filled (1,90) .075 Polyester 01 Terminal: Phosphor Bronze 01 Contact: BeCu (-T) (3,05) Plating: .120 (3,05) Sn over 50 (1,27 m) Ni (1,02) .120 .040 Wire: 30 AWG No. of positions x Current Rating: 0.5A/contact (1,27) .050 + (4,19) .165 Operating Temp Range: No. of positions x (1,27) .050 + (4,19) .165 -40C to +105C RoHS Compliant: Yes (5,08) *Note: Standard FFMD callout .200 will not mate with FLE, SFMC. (5,08) Must use gold plated callouts200 (See drawing on web.) (3,07) When mated with a socket, .121 Wire 1 mates with Pin 2 (1,27) Wire 2 mates with Pin 1, etc050 (1,27) Note: This Series is (0,41) .016 SQ .050 non-standard, non-returnable. WWW.SAMTEC.COM X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for D-Sub Micro-D Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : M243082311F M2430834F M24308/4-6F 65-1920-15 M83513/01-HN M83513/03-A10N M83513/03-B14C M83513/03-D09C M83513/03- D11N M83513/03-G02N M83513/03-G05N M83513/03-G08C M83513/03-G09N M83513/03-G12N M83513/03-H13N M83513/04-E15N M83513/04-G04C M83513/10-E01NP M83513/13-B01NP M83513/13-C01NN M83513/16-A01CP M83513/22-D01NP M83513/25-B01NP 6R2004A30F015 6R4006A28A120 703006A13F060 704002A03F200 705001A13F120 7-1532020-5 748567-1-P MDB1-31SH003 MDM- 15PBS-L58 MDM-15PCBRM7T MDM-15PH003B-A174 75-068624-59S MDM-15PH034B MDM-15SH001L MDM-15SH004B MDM- 21PH003K MDM-25PH003B-A174 MDM-25PHW01F-A174 MDM-37PH006L-A174 MDM-37PH048M5-A174 MDM-37SCBRP-A174 MDM-51PBS-L56 MDM-51PSF MDM-51SH003M7 MDM-51SSM7-A174 MDM-9PBSP-L58 MDM-9PH003M7