REVISION CB FTS-1XX-XX-XX-XX-XX OPTIONS No OF POSITIONS DO NOT -P: PICK AND PLACE PAD (USE PPP-25) -02 THRU -50 (UNSHROUDED) (AVAILABLE ON POSITIONS 04 THRU 50) SCALE FROM -06 THRU -46 (SHROUDED) THIS PRINT (SEE FIG 5, SHT 2 & FIG 7, SHT 3) (No OF POS x .0500 1.27 ) .010 0.25 LEAD STYLE (USE PPP-25-NT FOR TAPE & REEL) -TR: TAPE & REEL PACKAGING (SEE FIG 10, SHT 4) SEE TABLE 1 .050 1.27 REF (SEE NOTE 14 & 16) PLATING SPECIFICATION (ONLY AVAILABLE WITH -DV OPTION) 02 50 -S: END SHROUDS (SEE FIG 3, SHT 2 & FIG 6 SHT 3) -L: 10 GOLD IN CONTACT AREA, (LEAD STYLE -02 & -03 ONLY) MATTE TIN ON TAIL (05 POS MINIMUM, 46 POS MAXIMUM) -F: 3 GOLD IN CONTACT AREA, .135 3.43 (NOT AVAILABLE WITH -A OPTION ORDER -SA FOR C MATTE TIN ON TAIL L REF ALIGNMENT PIN WITH SHROUD) -S: 30 GOLD IN CONTACT AREA, (SEE NOTES 6 & 7) MATTE TIN ON TAIL -SA: END SHROUDS W/ ALIGNMENT PINS -H: 30 GOLD IN CONTACT AREA, 01 49 (SEE FIG 4, SHT 2 & FIG 8, SHT 3) 3 GOLD ON TAIL (LEAD STYLE -02 & -03 ONLY) FTS-XX-DV-XX -SM: 30 GOLD IN CONTACT AREA, (05 POS MINIMUM, 46 POS MAXIMUM) MATTE TIN ON TAIL (SEE NOTES 6 & 7) -LM: 10 GOLD IN CONTACT AREA, -A: MOLDED ALIGMENT PIN (USE FTS-XX-DV-XX) MATTE TIN ON TAIL (ONLY AVAILABLE IN -DV OPTION, 5 POS MINIMUM) -FM: 3 GOLD IN CONTACT AREA, (SEE FIG 9, SHT 3) MATTE TIN ON TAIL (No OF POS x .0500 1.270 ) (NOT AVAILABLE WITH -S OPTION ORDER -SA FOR -G: 10 GOLD IN CONTACT AREA, - .0500 1.270 ALIGNMENT PIN AND SHROUD) 3 GOLD ON TAIL .016 0.41 SQ TAIL OPTION REF (TYP) 2 MAX SWAY -D: DOUBLE ROW THROUGH HOLE 2 MAX SWAY (EITHER DIRECTION) .050.004 1.270.10 (EITHER DIRECTION) -DV: DOUBLE ROW VERTICAL SURFACE MOUNT (SEE NOTE 15) .070 1.78 REF (CONTACT AREA) (SEE NOTE 5) .090.010 2.290.25 (SEE NOTE 3) NOTES: 1. REPRESENTS A CRITICAL DIMENSION.C .034 0.86 2. PARTS MAY BE CUT TO POSITION. T-1SXX-XX-X 3. SHEAR TAILS TO DIMENSION SHOWN. REF (SEE TABLE 1) 4. MEASURED AT BEND RADIUS, NOT AT END OF PIN. 5. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL. (SEE NOTE 13) 6. 4 POSITIONS PER ROW WILL BE COVERED BY SHROUDS. 2 MAX SWAY (2 POSITIONS PER ROW ON EACH END). (EITHER DIRECTION) 7. 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ALLOW FIG 1 (No OF POS x .0500 1.270 ) - .0500 1.270 FOR SHROUDS, EXAMPLE FTS-125-02-L-D-SA REQUIRES A FTS-1XX-01-XX-D SHOWN 29 POSITION BODY. 8. NOTE DELETED. 02 50 9. MINIMUM PUSHOUT FORCE: .5 LB (8 OZ) 10. MAXIMUM CUT FLASH: .015 0.38 11. PPP-25-NT MUST BE USED FOR ALL TAPE AND REEL PACKAGING. C L 12. FILL BODY SO THAT THE LEAD IN OF THE CORE IS ON THE TAILS SIDE. 13. MAXIMUM BURR ALLOWANCE: .003 0.08 14. POSITIONS -05 THRU -50 TO BE TUBED. POSITIONS -02 THRU -04 ON TAIL OPTION -D TO BE LAYER PACKAGED. POSITIONS -02 THRU -04 01 49 ON TAIL OPTION -DV TO BE TAPE AND REELED. 15. MAX HEIGHT VARIATION BETWEEN ROWS: .005 0.13 . 16. FOR QUANTITIES LESS THAN 125 PIECES, NO REEL WILL BE SUPPLIED. MAY SUBSTITUTE ASP-61746-05-X .050.006 1.270.15 FOR RETENTION PURPOSES FOR -DV STYLE ONLY UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE +.005 +0.13 903 .050 1.27 DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION -.000 0.00 CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: (SEE NOTE 4) SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .004 0.10 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 .230.010 5.840.25 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: .050 X .050 C.L. LOW PROFILE (SEE NOTE 3) INSULATOR: LCP, UL 94 V0, COLOR: BLACK TERMINAL STRIP ASSEMBLY TERMINAL: PHOS BRONZE DWG. NO. FIG 2 SEE NOTE 12 SEE NOTE 13 FTS-1XX-XX-XX-XX-XX FTS-1XX-03-XX-DV SHOWN SECTION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) BY: BRATCHER 11/29/1993 SHEET OF1 4 F: DWG MISC MKTG FTS-1XX-XX-XX-XX-XX-MKT.SLDDRWREVISION CB (No OF POS x .050 1.27 ) + .034 0.86 C (No OF POS x .050 1.27 ) + .325 8.26 REF .137 3.48 REF L .137 3.48 (No OF POS x .050 1.27 ) + .200 5.08 REF C L REF (No OF POS x .050 1.27 ) + .034 0.86 .185 4.70 .200 5.08 REF REF FES .185 4.70 .2625 6.668 .115 2.92 FES-A .115 2.92 REF .140 3.56 REF REF REF FIG 3 .140 3.56 -DV-S OPTION (SEE NOTES 6 & 7) FTS-110-02-XX-DV-S SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS (NOT AVAILABLE WITH -A OPTION ORDER -SA FOR ALIGNMENT PIN WITH SHROUD) .050 1.27 REF .055 1.40 REF (No OF POS x .050 1.27 ) + .275 6.99 (No OF POS x .050 1.27 ) - .200 5.08 / 2 .020 0.51 .20 5.1 .23 5.8 REF REF REF .130 3.30 PPP-25-NT FIG 4 (USE PPP-25-NT FOR TAPE AND REEL PACKAGING ONLY) -DV-SA OPTION (SEE NOTES 6 & 7) FTS-106-02-XX-DV-SA SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (No OF POS x .050 1.27 ) - .200 5.08 / 2 .020 0.51 NOTE: 4 POSITIONS MUST BE ADDED TO PART CALLOUT TO ACHIEVE DIMS .20 5.1 .130 3.30 REF REF F: DWG MISC MKTG FTS-1XX-XX-XX-XX-XX-MKT.SLDDRW PPP-25 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO REF SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: .050 X .050 C.L. LOW PROFILE DO NOT SCALE DRAWING TERMINAL STRIP ASSEMBLY FIG 5 DWG. NO. SHEET SCALE: 4:1 -DV-P OPTION FTS-1XX-XX-XX-XX-XX FTS-110-02-XX-DV-P SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) BY: BRATCHER 11/29/1993 SHEET OF2 4