DO NOT
SCALE FROM
THIS PRINT
NOTES:
REVISION BQ
FTSH-1XX-XX-XXX-DH-XX
1. REPRESENTS A CRITICAL DIMENSION C
PATENT NUMBERS
2. MINIMUM PUSH OUT FORCE: .5 LB.
OPTIONS
No OF POSITIONS
3. MAXIMUM BURR ALLOWED: .002[.05].
5713755 / 5961339 -TR: TAPE AND REEL
-02 THRU -50
4. MAXIMUM CUT FLASH ALLOWED IN NON- CRITICAL AREA: .010[.25],
-A: ALIGNMENT PIN
NO CUT FLASH ALLOWED IN CRITICAL AREAS AS SHOWN. (PER ROW)
(SEE FIG 2, SHEET 2 & FIG 3, SHEET 3)
5. MAXIMUM HEIGHT VARIATION .005[.13] BETWEEN ROWS.
LEAD STYLE (MOLDED TO POSITION
6. APPLIES TO FIRST AND LAST PIN OF EACH ROW.
-01: .120 [3.05] OR STAKED)
-02: .075 [1.91] (SAMTEC DISCRETION WHICH
-04: .150 [3.81] -A PIN IS USED)
(STAKED 6 POSITION MIN. SEE FIG 3,
PLATING SPECIFICATION
SHEET 3, USE FTSH-50-DH)
(MOLDED 5 POSITION MIN. SEE FIG 2,
-L: 10" SELECTIVE GOLD IN CONTACT AREA,
SHEET 2, USE FTSH-50-DH-AXX)
MATTE TIN ON TAIL
-C: POLYIMIDE FILM
-F: 3" SELECTIVE GOLD IN CONTACT AREA,
(USE K-DOT-.197-.344-.005)
MATTE TIN ON TAIL
(SEE FIG 4, SHEET 3)
-S: 30" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30" GOLD IN CONTACT AREA,
TAIL OPTION
3" GOLD ON TAIL
-DH: DOUBLE HORIZONTAL
-LM: 10" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LTL: 10" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
-G: 10" GOLD IN CONTACT AREA,
3" GOLD ON TAIL
.000.002 0.000.05
(SEE NOTE 6)
C
DETAIL 'B'
SCALE 20 : 1
+.005[0.13]
(No OF POS x .0500[1.270])
.099 2.51 REF
-.010[0.25]
SEE NOTE 4
(No OF POS x .0500[1.270] - .0500[1.270]) C
2 MAX SWAY
(EITHER DIRECTION)
02 04
'B'
T-1S15-17-XXX
SEE NOTE 3
.135 3.43
.0500 1.270
C
REF
.006[0.15]
.070 1.78 REF
01 03
(CONTACT AREA)
.032 0.82
FTSH-50-DH
CRITICAL AREA
.21 5.3
2 MAX SWAY
(SEE NOTE 4)
(EITHER DIRECTION)
.016 0.41 SQ REF (TYP)
PROPRIETARY NOTE
* *
UNLESS OTHERWISE SPECIFIED,
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
DIMENSIONS ARE IN INCHES.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
TOLERANCES ARE:
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
DECIMALS ANGLES
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
.XX: .01 [.3] 2
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
.XXX: .005 [.13]
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
.XXXX: .0020 [.051]
WRITTEN CONSENT OF SAMTEC, INC.
e-Mail info@SAMTEC.com code 55322
MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION:
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
INSULATOR:
LCP, UL 94-V0 COLOR: BLACK
DWG. NO.
TERMINAL:
FIG 1 PHOSPHOR BRONZE, ALLOY No. 510, GRADE A, FED. SPEC.
FTSH-1XX-XX-XXX-DH-XX
QQ-B-750, SPRING TEMPER
FTSH-1XX-XX-XXX-DH SHOWN
BY: BRATCHER 01/04/1995 SHEET OF1 3
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRWREVISION BQ
.099 2.51 REF
(SEE TABLE 1)
.102 2.59
IN-PROCESS 1
.099 2.51 REF
'C'
(SEE TABLE 1)
+.003 +0.08
.000 0.010
-.001 -0.03
.09 2.3
C
.022 0.56 REF
DETAIL 'C'
IN-PROCESS 2
SCALE 20 : 1
.099 2.51 REF
(SEE TABLE 1)
FTSH-50-DH-AXX
.255 6.48
IN-PROCESS 3
PROPRIETARY NOTE
* *
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
.035 0.89 REF
(No OF POS - 2) x .050 [1.27] REF
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
.040 1.02 REF AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
520 PARK EAST BLVD, NEW ALBANY, IN 47150
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
FIG 2
PHONE: 812-944-6733 FAX: 812-948-5047
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
-A: ALIGNMENT PIN (MOLDED) OPTION e-Mail info@SAMTEC.com code 55322
DIFFERENT AS SHOWN, OTHERWISE
DESCRIPTION:
DO NOT SCALE DRAWING
SAME AS FIG 1
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
DWG. NO.
SHEET SCALE: 2:1
FTSH-1XX-XX-XXX-DH-XX
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW BY: BRATCHER 01/04/1995 SHEET OF2 3