HS-QSFP-P1-04 Samtec

FLYOVER QSFP CABLE ASSEMBLIES FEATURES & BENEFITS QSFP28, QSFP-DD and QSFP-D8 systems utilize Samtec Flyover technology to route data above lossy PCB, simplifying board layout and extending signal reach. The modular design enables optimized systems that improve heat management, increase signal integrity performance, build in scalability for future upgrades and reduces costs by creating a multifunction board. FLYOVER QSFP SYSTEM FLYOVER QSFP DOUBLE DENSITY 4 Channels (x4 bidirectional, 8 differential pairs) 8 Channels (x8 bidirectional, 16 differential pairs) Up to 400 Gbps aggregate (112 Gbps PAM4) Up to 400 Gbps aggregate (56 Gbps PAM4) Compatible with all MSA QSFP pluggables Bellytobelly mating for maximum density Multiple heat sink options available for optimal dissipation Backward compatible with QSFP modules Eye Speed 30 or 34 AWG twinax cable Multiple heat sink options available for optimal dissipation Multiple end 2 options for design flexibility Variety of end 2 options Evaluation Kits available (REF-205303-X.XX-XX and Evaluation Kits available (REF-205605-X.XX-XX and REF-200471-X.XX-XX), visit samtec.com/kits REF-203423-X.XX-XX), visit samtec.com/kits 800G FLYOVER DOUBLE DENSITY 8 Channels (x8 bidirectional, 16 differential pairs) Up to 800 Gbps aggregate (112 Gbps PAM4) Belly-to-belly mating for maximum density Backward compatible with QSFP & QSFP-DD modules Localized press-fit Highspeed contacts Multiple heat sink options available for optimal dissipation control and power directly soldered to contacts eliminate the Eye Speed ultra low Variety of end 2 options need for a secondary skew twinax cable and connector F-221 (Rev 06OCTR21) samtec.com/qsfp-flyover Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice. FLYOVER QSFP28 CABLE ASSEMBLY LEAD STYLE CABLE LENGTH PLATING CONTACT TYPE END OPTION FQSFP - - - - - 01 XX.X L PF 3 = 10 Low-Speed, = Length in inches = 10 (0.25 m) = Press-fit = ECUE 8 Pairs High-Speed 04.0 (101.6 mm) Gold over minimum 50 (1.27 m) 4 Ni on contact area, = ARC6-8 Matte Tin on tail OAL = CABLE LENGTH + (13.5) .53 FQSFP (10.85) (18.20) .427 .717 (15.00) .591 (14.50) .571 (5.65) (5.35) .222 .211 FQSFP01XX.XLPF4 SHOWN EMI PANEL CAGE OPTION NO. OF PORTS OPTION FLYOVER QSFPC - - - - - OPTION (Leave blank for no Light Pipe) (Leave blank 1 1 S for no flyover) =Single Stack = One Port = Spring LP Fingers = Light Pipe F 2 (1 & 4 ports only) = Flyover = Two Ports N 4 = No heat sink closed top = Four Ports (Not available with LP) (58.80) 2.315 QSFPC NO. OF A B C PORTS 1 (20.62) .812 (19.85) .781 (19.00) .748 A B 2 (39.62) 1.560 (38.85) 1.530 (38.00) 1.496 4 (77.62) 3.056 (76.85) 3.026 (76.00) 2.992 (9.65) (10.90) .380 .429 C Roadmap: Flyover QSFP-DD 800G QSFPC11SF SHOWN HEAT SINKS LIGHT PIPES PART NUMBER HEAT SINK HEIGHT PART NUMBER NO. OF PORTS HS-QSFP-P1-01 (4.20 mm) .165 LP-FQSFP-1 1 pipe HS-QSFP-P1-02 (6.50 mm) .256 LP-FQSFP-2 2 pipes HS-QSFP-P1-03 (13.50 mm) .531 LP-FQSFP-4 4 pipes View complete specifications at samtec.com LP-FQSFP HS-QSFP-P1-04 (1.50 mm) .059 For Light Pipe, add -LP to the end of part number. Notes: View complete specifications at samtec HS-QSFP Some sizes, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com FQSFP & samtec.com QSFPC samtec.com/qsfp-flyover F-221 Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.