REVISION Q HTSS-1XX-XX-XX-D-XX-XX No OF POSITIONS POLARIZATION OPTION -XX: INDICATES POSITION OMITTED DO NOT -02 (STRAIGHT ONLY) SCALE FROM -03 THRU -18, -20, -24, OPTION THIS PRINT -25, -28, -30, -32 & -36 BLANK: STRAIGHT (STYLES -04 & -05 N/A) -RA: RIGHT ANGLE (STYLES -01, -02 & -03 N/A) LEAD STYLE -LL: LOCKING LEAD (STRAIGHT ONLY) -LA: -RA OPTION WITH -LL OPTION -01,-02,-03 (SEE TABLE 1) (SEE TUBE TABLE FOR PACKAGING) -04, -05 (SEE TABLE 2) ROW SPECIFICATION ((No OF POS x .100) + .150) REF -D: DOUBLE ROW 2.54 3.81 (USE HTSS-XX-D) ((No OF POS x .100) + .050) REF PLATING SPECIFICATION 2.54 1.27 -G: GOLD, 10 Au / 50 Ni MIN ON CONTACT, 3 Au / 50 Ni MIN ON TAIL -T: MATTE TIN CONTACT AND TAIL C 02 04 L -S: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -H: HEAVY GOLD, 30 Au / 50 Ni MIN ON CONTACT, 3 Au / 50 Ni MIN ON TAIL -F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL .365 9.27 .250 6.35 .100 2.54 REF -TM: MATTE TIN CONTACT AND TAIL REF REF -SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL 01 03 -SS: STRIPE SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL (SEEN NOTE 7) FIG 1 .100 2.53 HTSS-111-01-XX-D-LL SHOWN .160 4.06 REF (-03 POS) .165 4.19 REF POS 1 INDICATOR .200 5.08 REF (ALL OTHER POS) GOLD PLATE (SEE NOTE 3) C SEE NOTE 4 .130 3.30 HTSS-XX-D REF -LL & -LA CRIMP LOCATIONS .250 6.35 REF .350 8.89 .250 6.35 .010 0.25 REF .000 0.00 REF (SEE NOTE 4) C .015 0.38 B SEE NOTE 6 C L REF *.04 1.0 TERMINAL (TYP) *.019 0.48 MIN (SEE TABLE 1) .025 0.64 SQ REF (TYP) SECTION ODD POS C EVEN POS *.0080 0.203 = CRIMP LOCATION DETAIL B SCALE 6 : 1 * DIMENSIONS APPLY WHEN USING -LL OPTION ONLY NOTES: UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION C CONFIDENTIAL AND PROPRIETARY TO 1. REPRESENTS A CRITICAL DIMENSION. TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED 2. TERMINAL PUSHOUT FORCE: 3 lbs. DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR 3. ASSEMBLE GOLD PLATED END AS SHOWN. DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS 4. TERMINALS TO BE FLUSH TO .010 .25 BELOW .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN TOP OF SHROUDXXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail: info SAMTEC.com code: 55322 5. HTSS-1XX-04-XX-D-XA-XX ASSEMBLIES ARE TO MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1.5:1 DESCRIPTION: BE PACKAGED IN A PT-1-24-01-40 TUBE WITH INSULATOR: LCP, UL 94 VO HIGH TEMP TOP SHROUD TERMINAL STRIP TWO TP-13 PLUGS PER TUBE (ALL POSITIONS). COLOR: NATURAL 6. SAMTEC LOGO MAY VARY IN LOCATION. DWG. NO. TERMINAL: PHOS BRONZE 7. AVAILABLE ON STRAIGHT LEAD STYLES -01, -02, -03 HTSS-1XX-XX-XX-D-XX-XX AND ON -RA LEAD STYLE -04. MATES ONLY WITH SSW, SSQ, SSM, BCS, ESW, ESQ. BY: BRATCHER 01/20/04 SHEET OF1 2 F: DWG MISC MKTG HTSS-1XX-XX-XX-D-XX-XX-MKT.SLDDRWREVISION Q REF 90 C .010 0.25 .000 0.00 FIG 2 (SEE NOTE 4) -RA & -LA OPTIONS .035.010 0.890.25 .010 0.25 (HTSS-111-04-XX-D-LA SHOWN) .000 0.00 (TYP) (SAME AS FIG 1, UNLESS OTHERWISE STATED) TERMINAL 1 (SEE TABLE 2) TERMINAL 1 2 MAX SWAY TERMINAL 2 (SEE TABLE 2) (EITHER DIRECTION) (SEE TABLE 2) C 02 04 L IN-PROCESS 2 IN-PROCESS 1 TUBE: PT-1-24-01-40 TUBE: PT-1-24-01-91 TUBE: PT-1-24-02-112 PLUG: TP-13 PLUG: TP-28 PLUG: TP-28 01 03 SEE NOTE 4 C REF FOR -05(5-36) POS FOR -04 FOR -05(3-4) POS C 90 TERMINAL 1 PACKAGING VIEW FOR LEAD STYLES -04 & -05 (SEE TABLE 2) C .100 2.54 .035.010 0.890.25 (TYP) TERMINAL 2 C *.0080 0.20 (SEE TABLE 2) (TYP) *.04 1.0 (TYP) * DIMENSIONS APPLY WHEN USING -LA OPTION ONLY PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail: info SAMTEC.com code: 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING HIGH TEMP TOP SHROUD TERMINAL STRIP DWG. NO. SHEET SCALE: 2:1 HTSS-1XX-XX-XX-D-XX-XX F: DWG MISC MKTG HTSS-1XX-XX-XX-D-XX-XX-MKT.SLDDRW BY: BRATCHER 01/20/04 SHEET OF2 2