(2.54 mm) .100 PITCH DISCRETE WIRE CABLE & COMPONENTS PINS PER WIRE PLATING ASSEMBLY END SERIES K LATCH OPTION - - - - - - - ROW GAUGE OPTION LENGTH OPTION (Metal latches for more MMSD 02, 03, 20 L XX.XX S K rugged environments = Double Row = 10 = Assembly = Single = Keyed 02, 05 & 10 positions only) PVC Cable (0.25 m) Length in Ended Polarization 04, 05, 20C Gold on Inches = Color M contact, (82.55 mm) MMSDT Coded Cable D 06, 08, = Single Ended, Metal Latches Tin on tail 03.25 min. = Double Row (MMSD & = Double (Leave blank for plastic) Blue *Teflon Cable MMSS only) Ended 10, 12, (20, 24, 28, 30 AWG only) (Latch Double Ended (D) Crossed Required) 22, 24 requires MMSD/MMSDT 15, 16, MMSS = Single Row 24C LUS 20, 25 PVC Cable = Color = Plastic Latch up, straight (Standard Coded Cable sizes) (MMSD & MMSST LDS MMSS only) = Single Row = Plastic Latch down, straight Blue *Teflon Cable 26, 28 (20, 24, 28, 30 AWG only) LUX 20C, 24C, 28C = Plastic Latch up, crossed CABLE COLOR CODING 28C MMSD, MMSDT, = Color PIN COLOR LDX MMSS, MMSST Coded Cable = Plastic Latch down, crossed 1 BROWN Board Mates: (MMSD & Assembly MMSS only) 2 RED IPL1 Length MUS 3 ORANGE (Does not mate with IPT1) (3.18) = Metal Latch up, straight 30 .125 4 YELLOW 5 GREEN Cable Mates: MDS = Metal Latch down, straight 6 BLUE MMTD(T), MMTS(T) No. of positions x (2.54) .100 7 VIOLET * Dupont Teflon is a MUX + (1.40) .055 8 GRAY registered trademark of = Metal Latch up, crossed 9 WHITE E.I. du Pont de Nemours and Company or its affiliates. (8.97) 10 BLACK MDX .353 ETC REPEAT = Metal Latch down, crossed Teflon cable is intended for crimp only. Contact Samtec for solderable cable applications. View complete specifications at: samtec.com MMSD, samtec.com MMSDT, samtec.com MMSS & samtec.com MMSST POSITIONS ROW LATCH WIRE PLATING SERIES IPD1 K 01 - PER ROW - OPTION - - OPTION - GAUGE - - OPTION 02, 03, 04, S K M CC79L 2630 L = Single = Keyed = Metal Latch = Contact, Loose = 26 to 30 AWG = 10 05, 06, 08, Row Polarization (Metal for (0.25 m) 10, 12, 15, more rugged Gold on CC79R 2024 environments) contact, 16, 20, 25 D = Contact, Full Reel = 20 to 24 AWG (02, 05 & 10 Tin on tail (Standard sizes) = Double (12,000 Parts per positions only) Row Reel) (Leave blank for plastic latch) (17.93) (12.83) .706 .505 S D M TOOLING Mini Applicator: CAT-MC-179-2024-XX-01 (20-24 AWG) Hand Tool: CAT-HT-179-2030-13 (20-30 AWG) Mini Applicator: CAT-MC-179-2630 XX-01 (26-30 AWG) Extraction Tool: CAT-EX-179-01 Not: Some lengths, styles and options are non-standard, non-returnable. View complete specifications at: samtec.com IPD1, samtec.com CC79L & samtec.com CC79R samtec.com/minimate F-221 (Rev 21DEC21) Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 787-8014-00 79531-3000 FCN-360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-001-10-001000 800-90-010-10-002000 801-43-002-10-013000