MMS-1XX-02-XXX-XX-XX-XXX REVISION CQ POLARIZING OPTION No OF POSITIONS 02 40 -XXX INDICATES POSITION No -02 THRU -40 DO NOT (USE PK-02-N) (PER ROW) SCALE FROM OPTION THIS PRINT LEAD STYLE .0787 2.000 REF -LC: LOCKING CLIP -02: SURFACE MOUNT (NOT AVAILABLE ON -SV) (USE LC-06-TM, SEE FIG 1, PLATING SPECIFICATION FIG 2 & 3, SHT 2 & NOTES 6 & 7) 01 -P: PICK & PLACE PAD -S: 30 SELECTIVE GOLD IN CONTACT AREA, -SV MATTE TIN TAIL (ONLY AVAILABLE ON -SV & -DV, 4 POS MIN) (-SV: USE PPP-09 -DV: USE PPP-03 -L: 10 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN TAIL SEE FIG 5, SHT 3) 80 02 -M: METAL PICK & PLACE PAD -F: 3 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN TAIL (ONLY AVAILABLE ON -DV) ** -T: MATTE TIN OVER ENTIRE CONTACT (USE LMP-03, SEE FIG 7, SHT 3) -LTL: 10 SELECTIVE GOLD IN CONTACT AREA, -A: MOLDED ALIGNMENT PIN .1574 3.998 TIN LEAD (90/10 5%) TAIL (AVAILABLE ON -DV ONLY) REF (USE MMS-XX-D-VXX, SEE FIG 4, SHT 3) -SM: 30 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN TAIL -K: POLYIMIDE FILM PAD (AVAILABLE ON 3 POS MIN, -LM: 10 SELECTIVE GOLD IN CONTACT AREA, MATTE TIN TAIL FOR -SV USE K-DOT-.118-.219-.005, 79 01 -FM: 3 SELECTIVE GOLD IN CONTACT AREA, FOR-DV USE K-DOT-.217-.313-.005) MATTE TIN TAIL (SEE FIG 6, SHT 3) -DV-LC -TM: MATTE TIN OVER ENTIRE CONTACT -TR: TAPE & REEL PACKAGING ** -H: 30 GOLD IN CONTACT AREA, (SEE FIG 8, SHT 4) 3 GOLD ON TAIL (AVAILABLE ON 2-36 POS ONLY) ENTRY/ROW SPECIFICATION -SH: SINGLE ROW, HORIZONTAL ENTRY ** = AVAILABLE TO EXISTING CUSTOMERS ONLY -DH: DOUBLE ROW, HORIZONTAL ENTRY -SV: SINGLE ROW, VERTICAL (TOP) ENTRY +.005 -DV: DOUBLE ROW, VERTICAL (TOP) ENTRY (No. OF POS x .0787 2.000 ) + .022 0.56 -.015 C C MMS-40-D SEE NOTE 11 (TOL ACCUM)(SEE NOTES 6 & 9) .048 1.22 (TYP) .048 1.22 (TYP) MMS-40-S +7 +7 90 -0 .1750 4.445 90 +.004 +0.102 +.0040 +0.102 -0 .1770 4.496 .1770 4.496 -.002 -0.051 -.0020 -0.051 REF C C (SEE NOTE 8) (SEE NOTE 8) .006 0.15 .006 0.15 .055 1.40 .056 1.42 C-63-22-XXX REF (TYP) C-63-22-XXX .010 0.25 REF LC-06-X -SV -DV-LC (No OF POS - 2) x .07874 2.0000 ) +.005 +0.13 +.005 +0.13 .232 5.89 .232 5.89 -.000 0.00 -.000 0.00 FIG 1 MMS-140-02-XXX-XV-LC SHOWN NOTES: C-63-22-XXX C-63-22-XXX -DV -SV C 1. REPRESENTS A CRITICAL DIMENSION. 2. MAXIMUM ALLOWABLE SWAY: 2 IN EITHER DIRECTION IN-PROCESS 3. MAXIMUM BURR ALLOWANCE: .003 0.08 4. MAXIMUM CUT FLASH: .020 0.51 . PROPRIETARY NOTE 5. MINIMUM RETENTION FORCE: SINGLE ROW: .5 LB, DOUBLE ROW: 1 LB * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND 6. CUT BODIES FROM MMS-40-D OR MMS-40-S FOR ALL STYLES EXCEPT -LC. DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS FOR -LC, USE POSITIONALIZED BODIES. 3 POSITION -DV-LC PARTS WILL HAVE 1 LOCKING CLIP. TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, 7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTIONXXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. 8. THIS DIMENSION TO BE MEASURED AT BEND. e-Mail info SAMTEC.com code 55322 9. FOR -SV LEAD STYLE, EVEN POSITON CUTS LOSE 2 POSITIONS PER CUT ODD MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: POSITION CUTS LOSE 1 POSITION PER CUT. INSULATOR: VECTRA E130i, COLOR: BLACK 2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM 10. LEAD STYLE -02-SH, POSITIONS 2 THRU 4 TO BE PACKAGED IN BOXES. ALL OTHER ROW CONTACT: PHOS BRONZE DWG. NO. SPECIFICATIONS SHOULD BE TUBED ACCORDING TO TABLE 2, REGARDLESS OF POSITION. 11. PK-02-N TO BE INSERTED FROM THIS SIDE. MMS-1XX-02-XXX-XX-XX-XXX c: enterprisevault DWG MISC MKTG MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW BY: BRATCHER 04/01/1994 SHEET OF1 4.175 4.45 REF REVISION CQ SEE NOTE 11 MMS-40-S-LC .055 1.40 (TYP) A 903 C C .0787 2.000 REF .006 0.15 .055 1.40 B 01 40 .010 0.25 REF (TYP) FLUSH TO .005 0.13 BELOW BODY C-63-06-XXX (No OF POS - 2) x .07874 2.0000 ) .056 1.42 REF LC-06-X .060 1.52 .061 1.55 C C .004 0.10 .004 0.10 (TAILS ONLY) (TAILS ONLY) C-63-06-XXX DETAIL A DETAIL B FIG 2 SCALE 12 : 1 SCALE 12 : 1 IN-PROCESS MMS-140-02-XXX-SH-LC SHOWN MMS-40-D-LC .055 1.40 (TYP) SEE NOTE 11 C 80 02 905 .1574 3.998 REF C .006 0.15 79 01 .055 1.40 D FLUSH TO .007 0.18 MAX .010 0.25 C BELOW BODY REF (TYP) C-63-08-XXX C-63-07-XXX (No OF POS - 2) x .07874 2.0000 ) LC-06-X .056 1.42 REF .128 3.25 C-63-07-XXX C-63-08-XXX .060 1.52 IN-PROCESS PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND C PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .004 0.10 INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR (TAILS ONLY) 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS DETAIL D WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 C SCALE 12 : 1 DESCRIPTION: DO NOT SCALE DRAWING 2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM .004 0.10 DWG. NO. (TAILS ONLY) SHEET SCALE: 3:1 FIG 3 MMS-1XX-02-XXX-XX-XX-XXX DETAIL C MMS-140-02-XXX-DH-LC SHOWN SCALE 12 : 1 c: enterprisevault DWG MISC MKTG MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW BY: BRATCHER 04/01/1994 SHEET OF2 4