COST-EFFECTIVE RUGGED SOCKETS (2.00 mm) .0787 PITCH SQW/SQT SERIES SQW/SQT NO. PINS PLATING ROW OPTION SQW 1 01 Board Mates: - PER ROW - - OPTION - OPTION - TMMH, TMMS, TMM, MTMM, MMT, TW, TSH, LTMM, ZLTMM, PTT 02 thru 50 F D XXX = Gold flash = Double Row = Polarized Position Cable Mates: on contact, DVS only options: TCMD Matte Tin DVS on tail = Double Row A Surface Mount = Alignment Pin L (5 positions minimum) SPECIFICATIONS = 10 Metal or plastic at Samtec discretion. T (0.25 m) (Not available with -LC) Insulator Material: = Triple Row Gold on Black Liquid Crystal Polymer contact, Contact Material: LC Q Matte Tin Phosphor Bronze = Locking Clip = Four Row on tail Plating: (5 positions minimum) Sn or Au over (Not available with -A) 5 50 (1.27 m) Ni (Manual placement required) = Five Row SQW Current Rating No. of positions x (2.00) .0787 + (0.30) .012 (SQW/TMMH): K 3.8 A per pin (2 pins powered) 6 = (4.25 mm) .167 DIA No. of SQT Current Rating = Six Row Polyimide Film Pick & Place Pad rows (TMMH/SQT): (4 positions minimum) x 5.1 A per pin (2 pins powered) (2.00) Voltage Rating: .0787 P 281 VAC mated with TMM = Pick & Place Pad 250 VAC mated with TMMH (4 positions minimum) Operating Temp Range: -55 C to +125 C SQW Insertion Depth: TR (2.29) (1.27) (2.62 mm) .103 to (6.35) = Tape & Reel .090 .050 .250 (5.03 mm) .198 with (428 positions only) (0.38 mm) .015 wipe SQT Insertion Depth: FR (2.62 mm) .103 to (4.74) = Full Reel Tape & Reel (5.03 mm) .198 .187 D, T, Q, (must order max. quantity per reel SQT Normal Force: 5, 6 contact Samtec for quantity breaks) DVS 60 grams (0.59 N) average (428 positions only) Max Cycles: 100 with 10 (0.25 m) Au PROCESSING NO. PINS LEAD PLATING ROW OTHER SQT 1 - PER ROW - STYLE - OPTION - OPTION - OPTION SQW LeadFree Solderable: Yes, for -D & -D-VS (Wave only for -T, -Q, -5 & -6) Specify SQT LeadFree Solderable: 02 thru 50 F S RA LEAD Yes = Gold flash = Single Row = Right-angle SMT Lead Coplanarity: STYLE on contact, (Q, 5 & 6 (0.10 mm) .004 max (02-10) Matte Tin on tail Row not from D (0.15 mm) .006 max (11-50)* available) chart = Double Row 4 *(.004 stencil solution (Lead Style L Gbps may be available contact 01 only) = 10 (0.25 m) T IPG samtec.com) Gold on contact, = Triple Row Matte Tin on tail XXX = Polarized Q Position No. of positions x (2.00) .0787 + (0.30) .012 = Four Row LEAD (Indicate A STYLE position No. of 5 number) rows 01 (2.29) .090 = Five Row x (2.00) 02 (15.24) .600 6 .0787 03 (5.28) .208 = Six Row (2.29) (6.35) .090 .250 A Note: Some lengths, styles and RA OPTION options are non-standard, (Q, 5 & 6 not available) non-returnable. F-221 (Rev 17AUG21) samtec.com SQW or samtec.com SQT Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtecs specifications which are subject to change without notice.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Headers & Wire Housings category: Click to view products by Samtec manufacturer: Other Similar products are found below : 892-18-020-10-001101 58102-G61-06LF 582553-1 0009485154 009176003701906 0050291907 LY20-4P-DT1-P1E-BR 02.125.8002.8 609-3404 61062-3 61082-181009 622-3653LF 63453-116 636-1030 636-1427 636-3427 636-4007 641938-9 641991-4 644827-2 65817- 010LF 65817-015LF 65863-015LF 66207-023LF 67095-007LF 67601157 68645-018 68648-049 70.362.1628.0 70-4210 70-4226B 70- 4853B 707-5020 707-5028 71.350.2428.0 71918-208LF 71961-016LF 733-134 733-162 754199-000 760-3052 79531-3000 FCN- 360C032-B FCN-367T-T012/H FCN-723D010/2 80.063.4001.1 800-90-010-10-002000 801-43-002-10-013000 801-43-006-10-002000 801-93-011-10-001000