TEMS1250203.0HD F-219 (Rev 23JAN19) TEM1450207.0HDWT TEM11002DH1SDA TEM12002DH1SDA (0.80 mm) .0315 TEM, TEMS, TEM-DH SERIES MICRO TIGER EYE HEADER TEM, TEM-DH Mates with: TYPE NO. OF STACK PLATING SEM, SEML OTHER OPTION 1 02 D STRIP POSITIONS HEIGHT OPTION OPTION TEMS Mates with: SEMS SPECIFICATIONS K Leave blank for TEMS = (5.50 mm) For complete specifications and 05, 10, 15, 20, 25 03.0 FG TEM .217 DIA recommended PCB layouts (Per Row) = 6 mm = Gold Flash = Tiger Eye A see www.samtec.com TEM or Polyimide Stack Height www.samtec.com TEMS Strip = Alignment Pin film Pick & (Not available with LC or WT) 30, 35, 40, 45, 50 G Place Pad Insulator Material: (Per Row) 04.0 = 10 (0.25 m) (Required Black Liquid Crystal Polymer TEMS Terminal Material: (TEM only) = 7 mm Gold on contact, for TEMS) = Tiger Eye LC Phosphor Bronze (Standard sizes) Stack Height Gold Flash on tail Slim Strip = Locking Clip Plating: (Not available with A or WT) TR Au or Sn over STACK (Manual placement required) MATED HEIGHT* 07.0 H = Tape & 50 (1.27 m) Ni A HEIGHT (WHEN MATED WITH SEM/SEMS) = 10 mm = 30 (0.76 m) Reel Current Rating: 03.0 (5.610) .2209 6 mm 2.9 A per pin Stack Height Gold on contact, (Required WT (6.610) .2602 7 mm (2 pins powered) 04.0 Gold Flash on tail for TEMS) = Weld Tab Voltage Rating: (9.610) .3783 10 mm 07.0 (Not available with A or LC) 235 VAC/330 VDC (No. of Positions x *Processing conditions will affect mated height. Operating Temp Range: (0.80) .0315) + (9.00) .354 -55 C to +125 C (No. of Positions (No. of Positions x POWER/SIGNAL RoHS Compliant: x (0.80) .0315) (0.80) .0315) + (7.00) .276 Yes APPLICATION A + (3.35) .132 02 02 PROCESSING (5.00) (3.70) (5.50) .217 .197 .146 Lead-Free Solderable: Yes 01 SMT Lead Coplanarity: 01 (0.80) .0315 (0.25) .010 TEM TEMS 10 YEAR MFG (0.10 mm) .004 max (0.24) WITH 30 GOLD .009 HIGH-SPEED CHANNEL PERFORMANCE EXTENDED LIFE RECOGNITIONS PRODUCT Rating based on Samtec reference Compatible with channel. For full SI performance data HIGH MATING For complete scope of UMPT/UMPS for flexible CYCLES 8 visit Samtec.com or contact recognitions see Gbps two-piece power/signal solutions SIG samtec.com www.samtec.com/quality NO. OF PLATING FILE NO. E111594 OPTION TEM 1 02 DH1 D POSITIONS OPTION OTHER SOLUTIONS A Latching option: = Alignment 10, 15, 20, 25, 30, 35, 40, 45, 50 F See TEM-L1 in Discrete Pin (Per Row) = Gold Flash on contact, Matte Tin on tail Wire Cable section. (Standard sizes) Board Stacking: L See SFM, TFM Series (No. of Positions x (0.80) .0315) + (9.00) .354 = 10 (0.25 m) Gold on contact, Cable Assemblies: Matte Tin on tail See SFSD, TFSD, SESDT Series S (8.50) = 30 (0.76 m) Gold on contact, .335 Matte Tin on tail ALSO AVAILABLE (No. of Positions x (0.80) .0315) + (4.00) .1575 02 (MOQ Required) Other sizes (3.70) (0.87) (6.00) .146 Other platings .034 .236 (1.40) 01 (1.27) (0.80) (0.25) (0.30) (6.28) .055 Note: .050 .0315 (0.50) .010 .012 .247 Some sizes, styles and (1.21) DIA .0197 (7.99) .315 options are non-standard, (No. of Positions x (0.80) .0315) + (7.00) .276 .048 A OPTION non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Board to Board & Mezzanine Connectors category: Click to view products by Samtec manufacturer: Other Similar products are found below : 10135583-642402LF 89885-310LF 589158040000018 6-1393048-0 68683-613 MDF7-12DP-2.54DSA MDF7-18P-2.54DSA(01) MDF7- 20DP-2.54DSA MDF7-26D-2.54DSA(55) MDF7-3P-2.54DSA(01) MDF7B-3P-2.54DSA(55) MDF7C-11P-2.54DSA(55) MDF7C-18P- 2.54DSA(55) MDF7C-5P-2.54DSA(01) MDF7P-5P-2.54DSA(55) 75234-0516 FCN-230C068-11 FCN-268F012-G/BD FCN-268F036-G/BD FCN-268M012-G/0D FCN-268M024-G/1D FCN-360C008-C FCN-360C040-C FCN-723J004/1 MIS-048-01-F-D-DP-K 832-10-034-10- 001000 93696-325LF 11828-1FA AXK630345P 18097-0013 ICA-328STT 2007042-2 304400-2 FCN-214Q030-G/0 FCN-215Q040-G/0 FCN-230C068-ESA FCN-234P048-G/0 FCN-235D050-G/C FCN-360A3 FCN-360C040-B 210-93-314-41-105000 2-22603-0 379-064-521- 202 MDF7-12P-2.54DSA(01) MDF7-16P-2.54DS(56) MDF7-40DP-2.54DSA(55) MDF7-8P-2.54DSA(55) MDF7B-16P-2.54DSA(55) AXG720047 5031084030