Product data sheet ABLM1A24025 Characteristics Regulated Power Supply, 100-240V AC, 24V 2.5 A, single phase, Modular Main Range of product Modicon Power Supply Product or component Power supply type Power supply type Regulated switch mode Variant option Modular Enclosure material Plastic Nominal input voltage 100...240 V AC single phase 100...240 V AC 2 phases Input voltage limits 90...264 V AC Kw Rating 60W Output voltage 24 V DC Power supply output 2.5A current Complementary Nominal network frequency 5060Hz Network system compatibility TN TT IT Maximum leakage current 0.25mA 240 V AC Input protection type Integrated fuse (not interchangeable) 3.15A External protection (recommended) 20A Curve B External protection (recommended) 20A Curve C External protection (recommended) 10A Curve B External protection (recommended) 6A Curve C Inrush current 30A 115 V 60A 230 V Power factor 0.50 at 115 V AC 0.39 at 230 V AC Efficiency 90% 115 V AC 90% at 230 V AC Output voltage adjustment 24...28 V Power dissipation in W 6.5W Current consumption < 1.5 A 115 V AC < 1 A 230 V AC Turn-on time < 2 s Holding time > 20 ms 115 V AC > 60 ms 230 V AC Startup with capacitive loads 3000F Residual ripple < 100 mV Expected capacitor life time 10year(s) Meantime between failure MTBF 1300000H at 77F (25C), full load 700000h at 131F (55C), 80 % load Output protection type Against overload and short-circuits, protection technology: automatic reset Against over temperature, protection technology: manual reset Against overvoltage, protection technology: manual reset Connections - terminals Screw connection 0.5...2.5 mm, AWG 20...AWG 14) without wire end ferrule output Screw connection 0.5...1.5 mm, AWG 20...AWG 16) with wire end ferrule output Screw connection 0.5...1.5 mm, AWG 20...AWG 16) input Line and load regulation < 0.5 %line < 1 %load Status LED Output voltage 1 LED Green) Jan 13, 2021 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Depth 2.19in (55.6mm) Height 3.58in (91mm) Maximum Width 2.09in (53mm) Net Weight 0.49lb(US) (0.221kg) Output coupling Serial Parallel Mounting support Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 Double-profile DIN rail Panel mounting Environment Standards EN 62368-1 EN/IEC 61010-1 EN 61010-2-201 EN/IEC 61204-3 EN 61000-6-1 EN 61000-6-2 EN 61000-6-3 EN 61000-6-4 EN 61000-3-2 EN 61000-3-3 UL 62368-1 UL 61010-1 UL 61010-2-201 CSA C22.2 No 62368-1 CSA C22.2 No 61010-1 CSA C22.2 No 61010-2-201 Product certifications CE CUL listed CUL recognized RCM CB Scheme EAC KC NEC class 2 Operating altitude < 6561.68 ft (2000 m) overvoltage category III 2000 m...5000 m overvoltage category II Shock resistance 100 m/s for 11ms IP degree of protection IP20 Ambient air temperature for operation 14131F (-1055C) without current derating) 131158F (5570C) with current derating of 2.67 % per C) -1314F (-25-10C) with current derating of 1 % per C) Ambient air temperature for storage -40185F (-4085C) Relative humidity 095% without condensation Overvoltage category II Electrical shock protection class Class II without PE connection Pollution degree 2 Vibration resistance 3 mm 29Hz)IEC 60721-3-3 10 m/s 9200Hz)IEC 60721-3-3 2