LC2D12BL

Product data sheet LC2D12BL Characteristics TeSys D reversing contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 24 V DC coil Main Commercial Status Commercialised Range of product TeSys D Product or component Reversing contactor type Device short name LC2D Contactor application Motor control Resistive load Utilisation category AC-1 AC-3 Device presentation Preassembled with reversing power busbar Poles description 3P Power pole contact 3 NO composition Ue rated operational <= 300 V DC for power circuit voltage <= 690 V AC 25...400 Hz for power circuit Ie rated operational 12 A (<= 60 C) at <= 440 V AC AC-3 for power cir- current cuit 25 A (<= 60 C) at <= 440 V AC AC-1 for power cir- cuit Motor power kW 7.5 kW at 660...690 V AC 50/60 Hz 7.5 kW at 500 V AC 50/60 Hz 5.5 kW at 415...440 V AC 50/60 Hz 5.5 kW at 380...400 V AC 50/60 Hz 3 kW at 220...230 V AC 50/60 Hz Motor power HP (UL / 10 hp at 575/600 V AC 50/60 Hz for 3 phases mo- CSA) tors 7.5 hp at 460/480 V AC 50/60 Hz for 3 phases mo- tors 3 hp at 230/240 V AC 50/60 Hz for 3 phases motors 3 hp at 200/208 V AC 50/60 Hz for 3 phases motors 2 hp at 230/240 V AC 50/60 Hz for 1 phase motors 1 hp at 115 V AC 50/60 Hz for 1 phase motors Control circuit type DC low consumption Control circuit voltage 24 V DC Auxiliary contact com- 1 NO + 1 NC position Uimp rated impulse 6 kV conforming to IEC 60947 withstand voltage Overvoltage category III Ith conventional free 25 A at <= 60 C for power circuit air thermal current 10 A at <= 60 C for signalling circuit Irms rated making ca- 250 A DC for signalling circuit conforming to IEC pacity 60947-5-1 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A at 440 V for power circuit conforming to IEC 60947 Rated breaking capac- 250 A at 440 V for power circuit conforming to IEC ity 60947 Icw rated short-time 140 A 100 ms signalling circuit withstand current 120 A 500 ms signalling circuit 100 A 1 s signalling circuit 210 A <= 40 C 1 s power circuit 105 A <= 40 C 10 s power circuit 61 A <= 40 C 1 min power circuit 30 A <= 40 C 10 min power circuit Jul 4, 2013 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Associated fuse rating 25 A gG at <= 690 V coordination type 2 for power circuit 40 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 Average impedance 2.5 mOhm at 50 Hz - Ith 25 A for power circuit Ui rated insulation 600 V for signalling circuit certifications UL voltage 600 V for signalling circuit certifications CSA 690 V for signalling circuit conforming to IEC 60947-1 600 V for power circuit certifications UL 600 V for power circuit certifications CSA 690 V for power circuit conforming to IEC 60947-4-1 Electrical durability 0.8 Mcycles 25 A AC-1 at Ue <= 440 V 2 Mcycles 12 A AC-3 at Ue <= 440 V Power dissipation per 0.36 W AC-3 pole 1.56 W AC-1 Safety cover With Interlocking type Mechanical Mounting support Plate Rail Standards EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 No 14 Product certifications BV CCC CSA DNV GL GOST RINA UL LROS Connections - terminals Control circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 2 cable(s) 1...2.5 mm - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 2 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 1 cable(s) 1...4 mm - cable stiffness: flexible - without cable end Tightening torque Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat 6 mm Operating time 20...30 ms opening 65.45...88.55 ms closing 2