DRA4-CX240D5

DIN Rail Mount DataSheet DRA4 CX Series 54mm Four Channel DIN Rail Mount SSR Assembly AC Ratings up to 280 VAC and 5 Amps 3-15 and 15-32VDC control Cage style screw terminals for easy connection Fits standard 35mm DIN rail Includes LED Status indicator PRODUCT SELECTION 5 A Control Voltage 3-15 VDC Control DRA4-CX240D5 15-32 VDC Control DRA4-CXE240D5 OUTPUT SPECIFICATIONS (1) Description DRA4-CX(E)240x5 Operating Voltage VAC 12-280 600 Transient Overvoltage Vpk Maximum Load Current Arms (2) 5 Minimum Load Current Arms 0.06 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 Minimum off-state dv/dt maximum rated voltage V/sec (3) 500 Maximum 1 Cycle Surge Current (50/60 Hz) Apk 239/250 Maximum It for fusing (50/60 Hz, 1/2 cycle) A sec 285/260 Maximum On-State Voltage Drop Rated Current Vpk 1.4 INPUT SPECIFICATIONS (1) Description DRA4-CX DRA4-CXE Control Voltage Range 3-15 VDC 15-32 VDC Must Turn On Voltage 3.0 VDC 15.0 VDC Must Turn Off Voltage 1.0 VDC 1.0 VDC Typical Input Current 15 mAdc 15 mAdc Nominal Input Impedance 300 Ohm 1500 Ohm 1/2 Cycle 1/2 Cycle Maximum Turn-On Time msec Maximum Turn-Off Time sec 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 VDC) 10 Ohm Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -30 to 80C Ambient Storage Temperature Range -30 to 125 C Weight (typical) 0.23 lb (104.6g) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) See derating chart on page 3. (3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 **NOTE: Voltages in excess of 380V will damage output terminals. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet WIRING DIAGRAM (A) Wiring Diagram OUTPUT INPUT 0.20 0.40 5.1 10.2 0.50 4 2 12.7 (B) LOAD CONTROL 4 3 2 1 POWER 3 + 1 (A) Wiring diagram is identical for each individual section wheter it is a single or four channel assembly. (B) Load can be placed on either side of Power. MECHANICAL SPECIFICATIONS Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters CX/CMX Series SSR 2.40 1.71 60.1 43.3 2.06 52.3 1.48 37.7 3.53 89.6 1.72 43.7 2.12 53.7 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.