1N5552 Sensitron

1N5550 thru 1N5554 Qualified Levels: VOIDLESS HERMETICALLY SEALED STANDARD JAN, JANTX, JANTXV Available on RECOVERY GLASS RECTIFIERS and JANS commercial versions Qualified to MIL-PRF-19500/420 DESCRIPTION This standard recovery rectifier diode series is military qualified and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 5.0 amp rated rectifiers for working peak reverse voltages from 200 to 1000 volts are hermetically sealed with voidless-glass construction using an internal Category 1 metallurgical bond. These devices are also available in surface mount MELF package configurations. Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including fast and ultrafast device types in both through- hole and surface mount packages. Important: For the latest information, visit our website 1N5550 thru 1N5554 MAXIMUM RATINGS Notes: 1. At .375 inch (9.52 mm) lead length from body. o 2. Derate linearly at 22.2 mA/C from +55 C to +100 C. 3. These I ratings are for a thermally (PC boards or other) mounting methods where the lead or end-cap temperatures cannot be maintained O o and where thermal resistance from mounting point to ambient is still sufficiently controlled where T does not exceed 175 C. This J(MAX) equates to R 47 C/W. JX 4. Derate linearly at 26.7 mA/C above T = +100 C to +175 C ambient. A MECHANICAL and PACKAGING CASE: Hermetically sealed voidless hard glass with tungsten slugs. TERMINALS: Axial-leads are tin/lead (Sn/Pb) over copper. RoHS compliant matte-tin is available for commercial only. MARKING: Body paint and part number. POLARITY: Cathode band. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: 750 milligrams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N5550 (e3) Reliability Level RoHS Compliance JAN = JAN Level e3 = RoHS compliant (available JANTX = JANTX Level on commercial grade only) JANTXV = JANTXV Level Blank = non-RoHS compliant JANS = JANS Level Blank = commercial JEDEC type number See Electrical Characteristics table SYMBOLS & DEFINITIONS Symbol Definition Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. V BR Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range V RWM excluding all transient voltages (ref JESD282-B). Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave I O input and a 180 degree conduction angle. V Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. F Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and I R temperature. Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from t rr the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs. T4-LDS-0230, Rev. 1 (111901) 2011 Microsemi Corporation Page 2 of 6