PC3SF11YVZ Series V : 600V, Reinforced insulation type DRM PC3SF11YVZ Non-zero cross type DIP 6pin Series Phototriac Coupler for triggering Zero cross type is also available. (PC3SF21YVZ Series) Description Agency approvals/Compliance PC3SF11YVZ Series reinforced insulation type 1. Recognized by UL1577 (Double protection isolation), Phototriac Coupler include an infrared emitting diode file No. E64380 (as model No. 3SF11) (IRED) optically coupled to an output Phototriac. 2. Approved by CSA, file No. CA95323 (as model No. These devices feature full wave control and are 3SF11) ideal isolated drivers for medium to high current Triacs. 3. Approved by BSI : BS-EN60065, file No. 6690/BS- DIP package provides 5.0kV isolation from input to EN60950, file No. 7421, (as model No. 3SF11) output with superior commutative noise immunity. 4. Approved by SEMKO, EN60065/EN60950, file No. 0033029 (as model No. 3SF11) 5. Approved by DEMKO, EN60065/EN60950, file No. Features 310107 (as model No. 3SF11) 1. High repetitive peak off-state voltage (V : 600V) DRM 6. Approved by FIMKO, EN60065/EN60950, file No. 2. Non-zero crossing functionality 15795 (as model No. 3SF11) 3. I ranks available (see Model Line-up section in this FT ( ) 7. Approved by VDE (DIN EN 60747-5-2), file No. datasheet) 40008189 (as model No. 3SF11) 4. 6 pin DIP package 8. Package resin : UL flammability grade (94V-0) 5. Reinforced insulation type (MIN. 0.4mm internal () DIN EN60747-5-2 : successor standard of DIN VDE0884 separation) Up to Date codeR (December 2003), approval of DIN 6. Superior noise immunity (dV/dt : MIN. 1 000V/s) VDE0884. From Date codeS1 (January 2004), approval of DIN 7. Lead-free components are also available (see Model EN60747-5-2. Line-up section in this datasheet) 8. Double transfer mold construction (Ideal for Flow Soldering) Applications 9. High isolation voltage between input and output 1. Triggering for Triacs used to switch on and off (V (rms) : 5.0kV) iso devices which require AC Loads. For example heaters, fans, motors, solenoids, and valves. 2. Triggering for Triacs used for implementing phase control in applications such as lighting control and temperature control (HVAC). 3. AC line control in power supply applications. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D2-A08001EN 1 Date Mar. 31. 2004 SHARP CorporationPC3SF11YVZ Series Internal Connection Diagram 1 Anode 1 6 2 Cathode 3 NC 2 5 4 Anode/Cathode 5 No external connection 3 4 6 Cathode/Anode (Unit : mm) Outline Dimensions 1. Through-Hole ex. PC3SF11YTZ 2. Wide Through-Hole Lead-Form ex. PC3SF11YVZ 0.3 0.3 1.2 1.2 0.2 0.6 0.2 0.6 Model No. 6 4 5 Model No. SHARP SHARP 6 5 4 mark Rank mark mark Rank mark 3SF11 3SF11 Anode 4 Anode 4 mark mark Date code (2 digit) Date code (2 digit) 1 2 3 1 3 VDE Factory identification mark 2 identification mark VDE Factory identification mark 0.5 0.3 identification mark 7.12 7.62 0.3 0.5 7.12 7.62 Epoxy resin Epoxy resin 0.1 0.25 0.5 0.1 2.54 0.26 0.5 0.25 0.1 10.16 2.54 0.5 : 0 to 13 Product mass : approx. 0.35g Product mass : approx. 0.35g 3. SMT Gullwing Lead-Form ex. PC3SF11YXP 4. Wide SMT Gullwing Lead-Form ex. PC3SF11YWP 0.3 0.2 0.6 1.2 0.3 0.2 1.2 0.6 Model No. 6 5 4 6 5 4 Model No. SHARP SHARP mark Rank mark mark Rank mark 3SF11 3SF11 Anode 4 Anode mark 4 mark Date code (2 digit) Date code (2 digit) 1 2 3 1 2 3 Factory identification mark VDE Factory identification mark VDE identification mark identification mark 0.5 0.3 7.12 7.62 0.5 0.3 7.12 7.62 Epoxy resin 0.25 0.25 2.54 2.54 Epoxy resin +0.4 +0.4 0.25 0.5 0.25 1.0 1.00 0 0.75 10.16 0.75 +0 10.0 MAX. 0.5 12.0 Product mass : approx. 0.33g Product mass : approx. 0.34g 5 Pin is not allowed external connection Sheet No.: D2-A08001EN 2 0.5 2.9 0.5 0.5 6.5 3.5 0.5 0.5 3.5 6.5 TYP. 0.5 0.1 3.25 0.5 0.26 0.25 0.35 0.5 2.9 0.5 0.5 0.5 0.5 3.5 3.5 6.5 3.25 0.5 6.5 TYP. 0.1 0.5 0.26 MIN. 2.7 0.25 0.25