PC410L0NIP0F Sharp

PC410L0NIP0F Series High Speed 10Mb/s, High CMR PC410L0NIP0F Mini-flat Package OPIC Photocoupler Series Description Agency approvals/Compliance PC410L0NIP0F Series contains a LED optically cou- 1. Recognized by UL1577 (Double protection isolation), pled to an OPIC chip. file No. E64380 (as model No. PC410L) ( ) It is packaged in a 5 pin mini-flat. 2. Approved by VDE, DIN EN60747-5-2 (as an op- Input-output isolation voltage(rms) is 3.75 kV. tion), file No. 40009162 (as model No. PC410L) High speed response(TYP. 10 Mb/s) and CMR is 3. Package resin : UL flammability grade (94V-0) MIN. 10 kV/s. () DIN EN60747-5-2 : successor standard of DIN VDE0884 Features Applications 1. 5 pin Mini-flat package 1. Programmable controllers 2. Double transfer mold package 2. Inverter (Ideal for Flow Soldering) 3. High noise immunity due to high instantaneous com- mon mode rejection voltage (CM : MIN.10 kV/s, H CM : MIN. 10 kV/s) L 4. High speed response (t TYP. 48 ns, t TYP. 50 ns) PHL : PLH : 5. High isolation voltage between input and output (V : 3.75 kV) iso(rms) 6. Lead-free and RoHS directive compliant OPI(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing circuit integrated onto a single chip. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D2-A04802EN 1 Date Jun. 30. 2005 SHARP CorporationAmp. PC410L0NIP0F Series Internal Connection Diagram 1 Anode 1 6 3 Cathode 4 GND 5 5 V (Open collector) O 6 V CC 3 4 Outline Dimensions (Unit : mm) 1. Mini-flat Package ex. PC410L0NIP0F 2. Mini-flat Package (VDE option) ex. PC410L0YIP0F 0.3 0.3 3.6 3.6 0.25 0.25 0.25 0.25 1.27 1.27 1.27 1.27 6 5 4 6 5 4 SHARP SHARP mark mark PC410L PC410L Anode Anode mark mark 4 VDE Identification mark Date code Date code 1 3 0.1 1 3 0.1 0.4 0.4 Factory identification mark Factory identification mark 0.3 0.3 5.3 5.3 Epoxy resin Epoxy resin 45 45 +0.4 +0.4 0.5 0.5 0.2 0.2 +0.2 +0.2 7.0 7.0 0.7 0.7 Product mass : approx. 0.1g Product mass : approx. 0.1g Plating material : SnCu (Cu : TYP. 2%) Sheet No.: D2-A04802EN 2 6 6 0.1 0.2 0.1 2.6 0.2 4.4 0.05 0.2 0.1 0.2 0.1 2.6 0.2 4.4 0.05 0.2