Siemens AG 2011 Siemens AG 2011 LOGO logic module 2 2/2 Introduction 2/2 LOGO logic module 2/3 LOGO modular 2/3 LOGO modular basic versions 2/6 SIPLUS LOGO modular basic versions 2/8 LOGO modular pure versions 2/11 SIPLUS LOGO modular pure versions 2/13 LOGO modular expansion modules 2/18 SIPLUS LOGO modular expansion modules 2/21 LOGO CM EIB/KNX communication module 2/22 AS-Interface connection for LOGO 2/23 LOGO Power 2/23 LOGO Power 2/33 SIPLUS LOGO Power 2/35 LOGO Contact 2/36 LOGO software Brochures For brochures serving as selection guides for SIMATIC products refer to: Siemens AG 2011 Siemens AG 2011 LOGO logic module Introduction LOGO logic module Overview General technical data of the SIPLUS LOGO Ambient temperature range -40/-25 ... +70 C Conformal coating Coating of the printed circuit boards and the electronic compo- 2 nents Technical data The technical data of the standard product applies except for the ambient conditions. Ambient conditions Relative humidity 5 ... 100%, condensation allowed Biologically active substances Conformity with EN 60721-3-3, Class 3B2 mold and fungal spores (except fauna) Chemically active substances Conformity with EN 60721-3-3, Class 3C4 incl. salt mist and ISA S71.04 severity level G1 G2 G3 1)2) GX Mechanically active substances Conformity with EN 60721-3-3, Class 3S4 including conductive 2) LOGO logic module sand, dust The compact, easy-to-use and low-cost solution for simple Air pressure (depending on the 1080 ... 795 hPa control tasks highest positive temperature range (-1000 ... +2000 m) specified) see ambient temperature range Compact, easy to operate, universally applicable without 795 ... 658 hPa (+2000 ... 3500 m) accessories derating 10 K All in on: Integrated display and operator panel 658 ... 540 hPa 36 different functions can be connected at the click of a button (+3500 ... +5000 m) or by means of PC software up to 130 times over derating 20 K Functions are easily changed at the press of a key. No more 1) ISA-S71.04 severity level GX: time-consuming rewiring Long-term load: SO < 4.8 ppm H S <9.9ppm Cl <0.2ppm HCl <0.66ppm 2 2 SIPLUS LOGO HF <0.12ppm NH <49ppm O < 0.1 ppm NOX < 5.2 ppm 3 Limit value (max. 30 min/d): The controller for use in the toughest ambient conditions SO < 17.8 ppm H S < 49.7 ppm Cl < 1.0 ppm HCl < 3.3 ppm 2 2 With extended temperature range from -40/-25 C to +70 C HF < 2.4 ppm NH < 247 ppm O < 1.0 ppm NOX < 10.4 ppm 3 2) Suitable for medial exposure (harmful gas atmosphere) The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases Condensation permissible With the proven PLC technology of LOGO Easy to handle, program, maintain, and service Ideal for use in automotive engineering, environmental engineering, mining, chemical plants, conveying technology, food industry, etc. Accessories: The front plate mounting set also allows simple and reliable installation of the logic modules in front plates IP65 protection is thus possible. In order to ensure dependable operation of SIPLUS devices supplied by the battery in conjunction with combustion engines, it is necessary to put in a SIPLUS upmiter upstream device between the battery and the SIPLUS LOGO . For further information, please go to: www.siemens.com/siplus-extreme For brochures serving as selection guides for SIMATIC products refer to: www.siemens.com/simatic/printmaterial Siemens ST 70 2011 2/2