P60 Silicon Labs

P60 Prototyping Board User s Guide This document describes the use of the P60 in an effort to help KEY POINTS users set up the board electrically and mechanically and to learn how to communicate to it. The document does not explain all Evaluation kit and prototyping board for the M64/M68 IEEE 1588 modules functionality provided by the M68 module. For more information, Provides full access to the features and see the M68/M64 Module Data Sheet. capabilities of the M68 Based on the M68 module, which is a superset of the M64 Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 1 Rev. 1.1 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice July 26, 2021 1Table of Contents 1. Scope..................................3 2. General Description.............................4 3. Before You Begin..............................5 4. Power..................................6 5. Block Diagram...............................7 6. Connectors................................8 6.1 Peripheral Interface ............................9 6.2 Ethernet Connection............................10 6.3 Serial Ports and USB Console.........................10 6.4 Clocking and Timing Signals .........................11 6.5 Reset.................................11 7. On-board Oscillator............................ 12 8. Powering the P60............................. 13 9. Connecting to the Board.......................... 14 10. Connecting to the Network......................... 15 11. Configure the PTP Engine......................... 16 12. Setting up P60 as PTP Grand Master..................... 17 12.1 Connecting PPS and TOD .........................17 12.2 Start the PTP Engine ...........................17 12.3 Check GNSS Reception on the M68 ......................17 12.4 Set up PTP Communication.........................17 13. Setting up P60 as an E2E, Multicast PTP Slave ................. 18 13.1 Setting up the P60 ............................18 14. Setting up P60 as an E2E, Unicast PTP Slave.................. 19 14.1 Setting up the P60 ............................20 15. Using the PTP Engine .......................... 21 16. Updating Firmware on P60......................... 22 17. References............................... 23 Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 Rev. 1.1 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice July 26, 2021 2