RS9113 USB Half Mini Card: A Multi Protocol Wireless Mini PCI Express (PCIe) Card PRODUCT BRIEF RS9113 USB Half Mini Card: A Multi Protocol Wireless Mini PCI Express (PCIe) Card The RS9113 USB Half Mini Card is based on Redpine Signals RS9113 ultra-low-power Convergence SoC. It offers dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee 802.15.4 in a single device over USB in a Mini PCIe Card form factor. The RS9113 USB Half Mini Card is a high performance, long range and ultra-low power device and includes a multi-threaded MAC processor called ThreadArch , baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch, dual-band antenna, u.FL connector and Quad-SPI flash. The software architecture for the USB Half Mini Card, n-Link , realizes a host-based architecture where the nec- essary MAC and PHY layers are implemented in the device to support high-performance, long range WLAN, Bluetooth and ZigBee applications in a 32-bit host processor over USB interface. Multi-protocol Wireless Features: WLAN Compliant with IEEE 802.11 a/b/g/n with dual band support. WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm. Wi-Fi Direct, Enterprise Security, Client and Access Point modes of operation. Bluetooth Compliant with dual-mode Bluetooth v4.0 Bluetooth transmit power up to 15dBm (class-1) with integrated PA Bluetooth receiver with -94dBm sensitivity. ZigBee Compliant with IEEE 802.15.4 ZigBee output powers up to +15dBm with integratedPA and high performance ZigBee receiver with -102dBm sensitivity. Embedded ZigBee Pro stack. Supports advanced security features: WPA/WPA2-Personal and Enterprise(EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP) Seamless integration with 32-bit processors over USB. System Block Diagram: R S 9 1 1 3Wireless Specifications Applications: IEEE 802.11 a/b/g/n, 802.11j , 802.11d/e/i, 802.11w , 802.1X, 802.11k , IoT gateway Network Standard Support 802.11v , 802.11r , 802.11h IoT node Bluetooth v2.1 EDR, v4.0 Industrial monitoring and control 802.15.4-2009 (2.4GHz) Industrial/Home gateway Medical devices Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) 802.11a/g: from 6 Mbps to 54 Mbps Device Ordering Information 802.11b: from 1 Mbps to 11 Mbps The device numbering is based on the following naming convention. All the devices are labeled as Bluetooth: 1, 2, 3Mbps RS9113-NBZ-D3N 802.15.4-2009: 250Kbps Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, 64-QAM 802.11b with CCK and DSSS Bluetooth: GFSK, DQPSK, 8DPSK 802.15.4-2009: DSSS 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU inside A-MPDU and Virtual AP support Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, 15 active slaves in proprietary mode, hold, sniff and park modes ZigBee Advanced Features CCM* security, orphan scanning, coordinator realignment Wi-Fi modes Wi-Fi client, Access point, Wi-Fi Direct Bluetooth Modes Master, slave, scatternet ZigBee Modes ZigBee Coordinator , Router , End device QoS WMM and WMM Power Save Support Host Interfaces USB 2.0 Supply Voltage 3.0-3.6V Package Description: Operating Temperature Industrial Grade -40C to +85C Software and Regulatory Certification Wi-Fi Alliance Compliance (802.11bgn, WPA, WPA2 Personal and Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct, Voice-Personal, Protected management frames ), Cisco CCX v5 , Bluetooth-SIG Qualification , Worldwide Regulatory Compliance: FCC (IDs are XF6-RS9113SB, XF6-RS9113DB) IC (IDs are 8407A-RS9113SB, 8407A-RS9113DB) CE/ETSI, TELEC , SRRC Typical Transmit Wi-Fi: 18 dBm for 802.11b DSSS Power(+/-2 dBm) 18 dBm for 802.11g/n OFDM 12 dBm for 802.11a/n OFDM LxWxH (mm) Bluetooth: 15 dBm Half Mini Card Dimensions ZigBee : 15 dBm 30 x 26.8 x 5.35 Rx sensitivity Wi-Fi: 1Mbps -97 dBm (< 8% PER) (+/- 1dBm) 54 Mbps -76.5 dBm (< 10% PER) MCS7(20MHz) -73 dBm (< 10% PER) MCS7(40MHz) -69.5 dBm (< 10% PER) Bluetooth: 1 Mbps -94 dBm 2 Mbps -92 dBm 3 Mbps -84 dBm BTLE(1Mbps) -91 dBm ZigBee: 250 Kbps -102 dBm (< 8% PER) : These features are not supported by current software releases. Contact Repine Signals Sales (sales redpinesignals.com) for details. : These certifications are in progress at this time. Contact Redpine Signals Sales (sales redpinesignals.com) for more details and for certifications not listed here. For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 680 San Jose, CA 95131 Phone: +1 408 748 3385 Email: sales redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. www.redpinesignals.com Copyright 2015 Redpine Signals, Inc. All Rights Reserved.