SI82398AD4-IS Silicon Labs

Si8239x Data Sheet 4.0 A ISODrivers with 2.5 V VDDI and Safety Features KEY FEATURES The Si8239x combines two isolated drivers with either an independent input control or a single input into a single package for high power applications. All drivers operate with a Two isolated drivers in one package 2.5 V input VDD and a maximum drive supply voltage of 24 V. Up to 5 kVRMS isolation Up to 1500 VDC peak driver-to-driver The Si8239x isolators are ideal for driving power MOSFETs and IGBTs used in a wide differential voltage variety of switched power and motor control applications. These drivers utilize Silicon Enhanced output UVLO safety Laboratories proprietary silicon isolation technology, supporting up to 5 kVRMS with- Status feedback to controller stand voltage. This technology enables high CMTI (100 kV/s), lower prop delays and Both outputs drive low on UVLO skew, reduced variation with temperature and age and tighter part-to-part matching. EN pin for enhanced safety It also offers some unique features such as an output UVLO fault detection and feed- Extended VDDI: 2.5 V 5.5 V back, and automatic shutdown for both drivers, an EN (active high) pin, a safe delayed PWM and dual driver versions start-up time of 1 ms, fail-safe drivers with default low in case of VDDI power-down, and 4.0 A peak output dead time programmability. The Si8239x family offers longer service life and dramatically High electromagnetic immunity higher reliability compared to opto-coupled gate drivers. Extended start-up time (1ms) for safe Automotive Grade is available for certain part numbers. These products are built using initialization sequence automotive-specific flows at all steps in the manufacturing process to ensure the robust- 30 ns propagation delay ness and low defectivity required for automotive applications. Transient immunity: 100 kV/s Automotive Applications Programmable dead time Industrial Applications 10200 ns On-board chargers Power Delivery Systems 40600 ns Battery management systems Motor Control Systems Deglitch option for filtering noise Charging stations Isolated DC-DC Power Supplies Wide operating range Traction inverters Lighting Control Systems 40 to +125 C Hybrid Electric Vehicles Solar and Industrial Inverters RoHS-compliant packages Battery Electric Vehicles SOIC-14/-16 wide body Safety Approvals (Pending) SOIC-16 narrow body UL 1577 recognized AEC-Q100 qualified Up to 5000 Vrms for 1 minute Automotive-grade OPNs available CSA approval AIAG compliant PPAP documentation support IEC60950-1, 62368-1 (reinforced in- sulation) IMDS and CAMDS listing support VDE certification conformity VDE 0884-10 (basic insulation) EN60950-1, 62368-1 (reinforced in- sulation) CQC certification approval GB4943.1-2011 (reinforced insula- tion) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 1 Rev. 1.02 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice July 26, 2021 1Table of Contents 1. Ordering Guide ..............................4 2. System Overview..............................7 2.1 Typical Performance Characteristics.......................8 2.2 Family Overview and Logic Operation During Startup.................9 2.2.1 Device Behavior............................10 2.3 Power Supply Connections..........................12 2.4 Power Dissipation Considerations .......................13 2.5 Layout Considerations ...........................14 2.6 Undervoltage Lockout Operation........................14 2.6.1 Device Startup ............................14 2.6.2 Undervoltage Lockout..........................15 2.6.3 Control Inputs.............................16 2.6.4 Enable Input .............................16 2.6.5 Delayed Startup Time ..........................16 2.6.6 RDY Pin...............................16 2.7 Overlap Protection and Programmable Dead Time..................17 2.8 De-glitch Feature .............................17 3. Applications............................... 18 3.1 High-Side/Low-Side Driver..........................18 3.2 Dual Driver ...............................19 3.3 Enhanced UVLO .............................19 4. Electrical Characteristics.......................... 20 5. Top-Level Block Diagrams ......................... 29 6. Pin Descriptions............................. 32 7. Package Outline: 14-Pin Wide Body SOIC.................... 33 8. Land Pattern: 14-Pin Wide Body SOIC..................... 34 9. Package Outline: 16-Pin Wide Body SOIC.................... 35 10. Land Pattern: 16-Pin Wide Body SOIC .................... 37 11. Package Outline: 16-Pin Narrow Body SOIC .................. 38 12. Land Pattern: 16-Pin Narrow Body SOIC.................... 39 13. Top Markings.............................. 40 13.1 Si8239x Top Marking (14-/16-Pin Wide Body SOIC).................40 13.2 Top Marking Explanation (16-Pin Wide Body SOIC).................40 13.3 Si8239x Top Marking (16-Pin Narrow Body SOIC) .................41 13.4 Top Marking Explanation (16-Pin Narrow Body SOIC) ................41 Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 Rev. 1.02 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice July 26, 2021 2