Si8285/86 Data Sheet SiC FET-Ready ISODrivers with System Safety Features KEY FEATURES The Si828x (Si8285 and Si8286) are isolated, high current gate drivers with integrated system safety and feedback functions. The devices are ideal for driving Silicon Carbide (SiC) FETs, System Safety Features power MOSFETs, and IGBTs used in a wide variety of inverter and motor control applications. DESAT detection The Si8285 and Si8286 isolated gate drivers utilize Skyworks proprietary silicon isolation FAULT feedback technology, supporting up to 5.0 kVrms withstand voltage per UL1577. This technology en- Undervoltage Lock Out (UVLO) ables higher performance, reduced variation with temperature and age, tighter part-to-part including 13 and 15 V for SiC matching, and superior common-mode rejection compared to other isolated gate driver tech- FET nologies. Soft shutdown on fault condition Ultra-fast short circuit protection The input to the device is a complementary digital input that can be utilized in several configu- << 1 s rations. The input side of the isolation also has several control and feedback digital signals. Robust reference design The controller to the device receives information about the driver side power state (Si8285) for current boost, DESAT and fault state of the device and recovers the device from fault through an active-low reset pin. adjustment, soft shutdown tuning, and external Miller clamp On the output side, the Si8285 provides separate pull-up and pull-down pins for the gate. transistor The Si8286 has a single pin for both functions. A dedicated DSAT pin detects a desaturation High-performance isolation condition and immediately shuts down the driver in a controlled manner using soft shutdown. technology The Si8285 device also integrates a Miller clamp to assure a strong turn-off of the power High CMTI 125 kV/s switch. 30 V driver-side supply voltage Automotive Grade is available. These products are built using automotive-specific flows at all Integrated Miller clamp (Si8285 steps in the manufacturing process to ensure the robustness and low defectivity required for only) automotive applications. Power ready pin (Si8285 only) Complementary driver control input Industrial Applications Automotive Applications Si8286 pin-out compatible with SiC/IGBT/ MOSFET gate drives Hybrid electric and electric vehicles HCPL-316J Industrial and renewable energy inverters Traction inverters Compact package: 16-pin wide- body SOIC AC, Brushless, and DC motor controls On-board chargers Automotive-grade OPNs available Variable-speed motor controllers Inductive chargers PPAP documentation support Isolated switch mode power supplies DC-DC converters IMDS and CAMDS listing support Safety Regulatory Approvals AEC-Q100 Qualified UL 1577 recognized: 5000 V for 1 minute RMS Temp range: 40 to 125 C CSA approval: IEC 62368-1 (reinforced insulation) VDE certification: IEC 60747-17 (basic, pending), 62368-1 (reinforced insulation) CQC certification approval: GB4943.1-2011 (reinforced insulation) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 1 Rev. 2.0 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 12, 2021 1Table of Contents 1. Si8285/86 Ordering Guide ..........................3 2. Product Overview .............................4 2.1 Isolation Channel Description.........................4 2.2 Device Behavior .............................5 2.3 Main Features ..............................5 3. Applications Information...........................7 3.1 Recommended Application Circuits.......................7 3.1.1 Power ...............................8 3.1.2 Inputs ...............................8 3.1.3 Reset, RDY, and Fault..........................9 3.1.4 Desaturation .............................9 3.1.5 Driver Outputs.............................10 3.1.6 Miller Clamp (Si8285 Only) ........................11 3.1.7 Additional Adjustments for the Si8285 and Si8286 ................11 3.2 Layout Considerations ...........................11 4. Electrical Specifications .......................... 12 4.1 Timing Diagrams .............................16 4.2 Typical Operating Characteristics........................17 4.3 Regulatory Information ...........................20 5. Pin Descriptions............................. 23 6. Packaging ............................... 24 6.1 Package Outline: 16-Pin Wide Body SOIC.....................24 6.2 Land Pattern: 16-Pin Wide Body SOIC......................26 6.3 Top Marking: 16-Pin Wide Body SOIC ......................27 7. Revision History............................. 28 Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 Rev. 2.0 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 12, 2021 2