TS1003 THE ONLY 0.8V TO 5.5V, 0.6A RAIL-TO-RAIL SINGLE OP AMP DESCRIPTION FEATURES The TS1003 is the industrys first sub-1A supply Single 0.8V to 5.5V Operation Supply current: 0.6A (typ) current, precision CMOS operational amplifierfull y specified to operate over a supply voltage range from Input Bias Current: 2pA (typ) Low TCV : 9V/C (typ) 0.8V to 5.5V. Fully specified at 1.8V, the TS1003 is OS optimized for ultra-long-life battery powered AVOL Driving 100k Load: 90dB (min) Gain-Bandwidth Product: 4kHz applications. The TS1003 isthe fourth operational amplifier in the NanoWatt Analog high- Unity Gain Stable Rail-to-rail Input and Output performance analog integrated circuits portfolio. The TS1003 exhibits a typical input bias current of 2pA, No Output Phase Reversal 5-pin SC70 or 5-pin SOT23 Packaging and has rail-to-rail input and output stages. The TS1003s combined features make it an excellent choice in applications where very low supply current APPLICATIONS and low operating supply voltage translate into very Battery/Solar-Powered Instrumentation long equipment operating time. Applications include: Portable Gas Monitors micropower active fierlt s, wireless remote sensors, Low-voltage Signal Processing battery and powerline current sensors, portable gas Micropower Active Filters monitors, and handheld/portable POS terminals. Wireless Remote Sensors Battery-powered Industrial Sensors The TS1003 is fully specified over the industrial Active RFID Readers temperature range (40C to +85C) and is available Powerline or Battery Current Sensing in either a PCB-space saving 5-lead SC70 or a 5-lead Handheld/Portable POS Terminals SOT23 packaging. TYPICAL APPLICATION CIRCUIT Supply Current Distribution A MicroWatt 2-Pole Sallen Key Low Pass Filter 35% V = 1.8V DD 30% 25% 20% 15% 10% 5% 0% 0.48 0.53 0.58 0.63 Supply Current - A Page 1 2014 Silicon Laboratories, Inc. All rights reserved. Percent of Units - % TS1003 ABSOLUTE MAXIMUM RATINGS Total Supply Voltage (V to V ) ............................. +6.0V Operating Temperature Range ................... -40C to +85C DD SS Voltage Inputs (IN+, IN-) ........... (V - 0.3V) to (V + 0.3V) Junction Temperature ............................................ +150C SS DD Differential Input Voltage .......................................... 6.0 V Storage Temperature Range .................... -65C to +150C Input Current (IN+, IN-) ............................................ 20 mA Lead Temperature (soldering, 10s) ........................... +300 Output Short-Circuit Duration to GND ................... Indefinite Continuous Power Dissipation (T = +70C) A 5-Pin SC70 (Derate 3.87mW/C above +70C) .... 310 mW 5-Pin SOT23(Derate 3.87mW/C above +70C) ... 312 mW Electrical and thermal stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other condition beyond those indicated in the operational sections of the specifications is not implied. Exposure to any absolute maximum rating conditions for extended periods may affect device reliability and lifetime. PACKAGE/ORDERING INFORMATION TAPE & REEL PART PACKAGE TAPE & REEL PART PACKAGE ORDER NUMBER MARKING QUANTITY ORDER NUMBER MARKING QUANTITY TS1003IJ5 --- TS1003IG5 --- TAH TAEA TS1003IJ5T 3000 TS1003IG5T 3000 Lead-free Program: Silicon Labs supplies only lead-free packaging. Consult Silicon Labs for products specified with wider operating temperature ranges. Page 2 TS1003 Rev. 1.0