150-2 AC Amp-Clamp Adapters Amp-Clamp Adapters Amp-Clamp current probes, used with analog VOMS provide accurate measurements of high AC current found in power systems and related control circuitry. The Amp-Clamp jaws are closed over a conductor in the circuit and the current load is indicated on the connected meter. The 150-2 has six ranges (up to 300 ACA) and is available with banana and reverse banana plugs. Specifications PHYSICAL AC Amp-Clamp Adapter Dimensions: 7.8 x 3 x 1.1 Model 150-2 Weight: 12 oz. Ranges 5A, 10A, 50A, 100A, 250A (on 2.5 VAC Meter Range), Max. Cable Dimension: 1.125 diameter 6A, 12A, 30A, 60A, 120A, 300A (on 3 VAC Meter Range) Max. Bus Bar Dimensions: 2.38 x 0.38 Accuracy 3% Full Scale Ordering Information Amp-Clamp Catalog No. 150-2 AC Clamp, VOM Banana Plug 00541 150-2 AC Clamp, VOM Reverse Plug 00545 Cable, replacement, reverse banana (used with 00545) 00529 Cable, replacement, banana (used with 00541) 00533 1 Rev. 04-15X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Clamp Multimeters & Accessories category: Click to view products by Simpson manufacturer: Other Similar products are found below : I800 MT-8006B 3PK-NT023N MT-7057N TESTO 770-3 0590 7703 AX-3550 AX-M266C BM079 BM089 BM162 BM197 KEW2210R FLUKE 80I-110S FLUKE A3002FC FLUKE I200 FLUKE I200S FLUKE I310S CIE600 TESTO 770-2 0590 7702 KEW2433R KEW8112 FLUKE 772 ACDC-100 MA440 MA443 MA445 FLUKE-374 FC FLUKE-1630-2FC CM42 FLUKE-376 FC A193 (800 MM) F201 F205 F65 DIGIFLEX 4000A 350MM DIGIFLEX 400A 250MM MN93A FLUKE A3001FC FLUKE I6000SFLEX-24 KEW2010 P1670 382357 FLK-A3004FC AMP-330-EUR APPA SFLEX-18D UT200A UT201 UT205 UT205A UT206