Commercial/Medical
D C P o w e r S u p p l i e s
International + Linears
International + Linears
Summary:
World-wide ac input ranges and safety
standards
Industry standard packages
Commercial UL/CSA TUV/IEC approved
models to UL/CSA 60950; EN/IEC60950-1
Burn-in with cycling; 3-year warranty
Capacitors have highest CV & ripple current
ratings
Medical Approved to UL2601-1/60601-1,
IEC60601-1 and CSA601.1
Medical leakage 10 A
MTBF 200,000+ hours per MIL-HDBK-217D
(most units)
All electrolytic caps rated at 105C
Transformer insulation meets Class F (155C)
Exceed FCC and CISPR22, Class B conducted
emissions
RoHS Compliant models available (G suffix)
marked to LVD
SPECIFICATIONS
Remote Sensing
Ac Input
Provided on all models; open sense lead protection built-in (except HA & HTAA
100, 120 and 240 Vac: +10%, -13%; 215 Vac: +12%, -11%; 47 to 63Hz. Toler-
series).
ance for 230 Vac operation is +15%, -10%. Derate output current 10% for 50
Stability
Hz operation.
0.05% for 24 hours after warmup.
Dc Output
Temperature Rating
See voltage rating chart. Adjustment range 5% minimum except HA series.
0 to 50C full rated, derated linearly to 40% at 70C.
Line Regulation
Temperature Coefficient
0.05% for a 10% change.
0.01%/C maximum.
Load Regulation
Efficiency
0.05% for a 50% load change.
5 V units: 45%; 12 and 15 V units: 55%; 20 and 24 V units: 60%.
Output Ripple
Logic Inhibit and Current-Share
3 mV +0.05% of output voltage, peak to peak maximum. All 3-terminal regu-
F & G models.
lator outputs: 3 mV +0.2% peak to peak maximum.
Medical Stock and Vibration
Transient Response
Per Mil-Std-810D, Method 514.3, Category 1, Procedure 1.
<50 microseconds for 50% load change.
Per Mil-Std-810D, Method 516.3, Procedure III.
Short Circuit Protection
Storage
Automatic current limit/foldback.
-40 to +85 C.
Overvoltage Protection
Built-in on all 5 V models, set at 6.2 V 0.4 V. Other models use optional over-
voltage protection.
O
All specifications are typical at nominal input, full load at 25 C unless otherwise statedCommercial Model (Single) Medical Model Voltage Current Case
HB2-3-A+G 2 V 3 A B
HC2-6-A+G 2 V 6 A C
HE2-18-A+G 2 V 18 A E
ML5-1-OV-A 5 V 1.0 A L
HA5-1.5-OV-A+G 5 V 1.5 A B
HB5-3-OV-A+G 5 V 3 A B
HC5-6-OV-A+G 5 V 6 A C
HN5-9-OV-A+G 5 V 9 A N
HD5-12-OV-A+G 5 V 12 A D
HE5-18-OV-A+G 5 V 18 A E
F5-25-OV-A+*G 5 V 25 A F
G5-35-OV-A+ * (1) 5 V 35 A G
CP197-A+G 5 V 50 A G
ML12-0.5-A 12 V 0.5 A L
HA15-0.9-A+ (12 V)G 12 V 0.9 A B
HB12-1-7-A+G MB12-1-7-A 12 V 1.7 A B
HC12-3.4-A+G MC12-3.4-A 12 V 3.4 A C
HN12-5.1-A+G 12 V 5.1 A N
HD12-6.8-A+G MD12-6.8-A 12 V 6.8 A D
HE12-10-2-A+G 12 V 10.2 A E
ML15-0.4-A 15 V .4 A L
HA15-0.9-A+G 15 V 0.9 A B
HB15-1.5-A+G MB15-1.5-A 15 V 1.5 A B
HC15-3-A+G MC15-3-A 15 V 3 A C
HN15-4.5-A+G 15 V 4.5 A N
HD15-6-A+G MD15-6-A 15 V 6 A D
HE15-9-A+G * 15 V 9 A E
F15-15-A+G * 15 V 15 A F
HA24-0.5-A+G 24 V 0.5 A B
HB24-1.2-A+G MB24-1.2-A 24 V 1.2 A B
HC24-2.4-A+G MC24-2.4-A 24 V 2.4 A C
HN24-3.6-A+G 24 V 3.6 A N
HD24-4.8-A+G MD24-4.8-A 24 V 4.8 A D
HE24-7.2-A+G * 24 V 7.2 A E
F24-12-A+G * 24 V 12 A F
HA24-0.5-A+ (28 V)G 28 V 0.5 A B
HB28-1-A+G MB28-1-A 28 V 1 A B
HC28-2-A+G MC28-2-A 28 V 2 A C
HN28-3-A+G 28 V 3 A N
HD28-4-A+G MD28-4-A 28 V 4 A D
HE28-6-A+G * 28 V 6 A E
F24-12-A+(28 V)G * 28 V 10 A F
HB48-0.5-A+G 48 V 0.5 A B
HC48-1-A+G 48 V 1 A C
HD48-3-A+G ** 48 V 3 A D
HE48-4-A+G 48 V 4 A E
F48-6-A+G * 48 V 6 A F
Notes:
1. All single output models have isolated outputs.
2. Model G5-50-OV-A+ not RoHS compliant