PENT1040D
Universal 40 Watt (Pre-standard IEEE802.3at Compliant)
High Power PoE Injector 1 Year Warranty
10/100 (MbPS) Data Rates
Self-contained Injector
100-250VAC Universal Input
Desktop Style / Non-vented Case
IEEE802.3af Compliant Detection, Disconnect,
Overload and Over Voltage Control Function
Load Diagnostic LED
UNH IOL Test Report
Over Load Shutdown and Short Circuit Protection
Regulated Output With Low Ripple
Complies with EMI/RFI Regulations
CE Compliant
Midspan
International Safety Standard Approvals
Specifications
Output Specifications General Specifications
Combined Line andLoad Excluding Cord 1%
Topology Switching-Fixed
Voltage Regulation
FrequencyFlyback
Ripple 1% Vp-p max.
Dielectric Withstand Primary-Secondary 3000VAC, 4250VDC
Secondary-Ground 500VDC
Transient Response 0.5ms for 50%
LoadChange Typical
Spacing 5mmPrimary-Secondary
Protection FoldbackOvercurrent
Leakage Current Lessthan 250 uA
Protection,
Efficiency 75.1% min.
ShortCircuit Protection
EMC Information
Emissions FCCPart 15. Class B
Input Specifications
EN55022. Class B
Harmonic EN61000-3-2
AC Input VoltageRange 100-250VAC -10%,+6%
VFF EN61000-3-3
Line Frequency 47-63Hz
ESD EN61000-4-2. Level2
RF EFI EN61000-4-3. Level 2
AC Input Current 1.0A max.
EFT EN61000-4-4. Level 2
Protection InternalPrimary
Surge EN61000-4-5. Level 3
Current Fuse,
CDI EN61000-4-6. Level 2
Inrush Limiting
CD EN61000-4-8. Level 1
VoltageDips EN61000-4-11
CE LVD, EMC, RoHS, WEEE,CE Compliant
Environmental Specifications
Hold-upT ime @120VAC 18msmin. typ.
Thermal Performance Operating Temperature 0C to 40 C
NoDerating,
StorageT emp -30C to+85 C
Convectional Cooling
Approvals and Safety cULus: UL/CSA60950
Non Vented Case
Standards TUV: EN60950
RelativeHumidity Non-Condensing 5%to 95%
CE:L VD, EMCD
Altitude 0-10,000 feet
MTBF 100,000Calculated Hours
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone:805.486.4565 Fax:805.487.8911 Email:info@slpower.com www.slpower.comPENT1040D
Universal 40 Watt (Pre-standard IEEE802.3at Compliant)
For the most current data and application support visit www.slpower.com
High Power PoE Injector
Output Currents
Output Max Ripple
Ault Part Number Voltage Min Max Watts Vp-p max.
PENT1040D5600F01 56 V 0.00 A 0.71 A 40W 560mV
Ault Part Number Key
PENT 1 040 D 56 00 F 01
Product Numberof Output Configuration Output Output Input Standard
Family Outputs Wattage Type Voltage Connector Configuration (no modifications
Name or special packaging)
Input Configuration Pin Connections
IEC320 IEC320 N. America/ Europe Australian Shaver
United IEC320 IEC320 N. America/ Europe Australian Shaver
United
w/ground
w/o ground Japan (M) Kingdom (E) w/grouCn8d w/o ground Japan (M) (E) C8
Kingdom
C14 C18 (B) C14 (N) C18 (B) (N)
(G) (G)
(F) (Q) (F) (Q)
General Specifications (continued from p. 1)
87654321 87654321
Weight (excluding cord) 7 Ounces, 200 Grams
Case andDimension 5.24L x2.13W x 1.42H(in)
J1 J2
133.0L x 54.0W x 36.0H (mm)
Case Material Black94V0
Polycarbonate
J1Pins J2Pins
Cord and Connectors DualRJ45 jacks built into 1.Data Pair 1 1. DataPair 1
the enclosure
2. Data Pair1 2. Data Pair 1
3. Data Pair 2 3.Data Pair2
4.+ VDC 4.No Connection
Personalized PoE
5. + VDC 5. No Connection
Options(additional costs mayapply):
6.Data Pair 2 6.Data Pair 2
7. - VDC 7. No Connection
Custom labelartwork
8.- VDC 8.No Connection
Custom agencyapprovals available
Surge protection(Input & Output)
Mounting bracket
Custom PoE modifications
Power over Ethernet Plus (known as PoEP and/or PoE+) IEEE802.3at:
Proposed standard is indevelopment; decision expected in the next
4-6 months
Operateson Cat5 and higher infrastructure
Uses all fourpairs ofstandard Ethernet Category 5 cable to provide
up to 56 watts of power
Backwards compatible with IEEE802.3af standard
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone:805.486.4565 Fax:805.487.8911 Email:info@slpower.com www.slpower.com
Data Sheet 2008 SL Power ElectronicsCorp. Theinformation and specifications contained inthis data sheet are believed to be correctat time of publication.
However, SL Poweraccepts no responsibility forconsequences arising from reproductionerrors or inaccuracies.Specifications are subject to change without notice.
Rev.9/3/08