BOB-00765

ENC28J60-H development board User s manual All boards produced by Olimex are ROHS compliant Document revision B, January 2015 Copyright(c) 2015, OLIMEX Ltd, All rights reserved Page 1INTRODUCTION ENC28J60-H is worlds smallest Ethernet controller development board with its size of only 3024mm. It provides easy connection to any microcontroller with only few ports via SPI which makes it perfect for adding Ethernet connectivity to embedded applications. BOARD FEATURES ENC28J60 10 Mbit Ethernet controller on-board RJ45 connector with build in Ethernet transformer and two status LEDs easy interface to any microcontroller via SPI compact size in DIL 10 pin format, the distance between pin rows is 0.8 PCB: FR-4, 1.5 mm (0,062 ), soldermask, white silkscreen component print Dimensions: 3024 mm (1.180.95 ) ELECTROSTATIC WARNING The ENC28J60-H board is shipped in protective anti-static packaging. The board must not be subject to high electrostatic potentials. General practice for working with static sensitive devices should be applied when working with this board. Ethernet Controller Features ENC28J60-H board use ENC28J60 stand-alone Ethernet controller with these features: IEEE 802.3. Compatible Ethernet Controller Fully Compatible with 10/100/1000Base-T Networks Integrated MAC and 10Base-T PHY Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Programmable Automatic Retransmit on Collision Programmable Padding and CRC Generation Programmable Automatic Rejection of Erroneous Packets SPI Interface with Clock Speeds Up to 20 MHz Page 2