KSK-1A83-100150 Standexmeder

KSK-1A83-... MEDER electronic DIMENSIONS CHARACTERISTICS All dimensions in mm inches Glass length of 53.4 mm and diameter of 5.4 mm Normally open 1 Form A contact 7.5 kVDC switching voltage 3.0 Amp switching current CONTACT DATA Switch Model KSK-1A83... o All Data at 20 C Contact Form Form A Contact Ratings Conditions Min. Typ. Max. Units Any DC combination of V and A not Switching Power* 50 W to exceed their individual max.s Switching Voltage DC or peak AC 7.5 kV Switching Current DC or peak AC 3.0 A Carry Current DC or peak AC 5.0 A Static Contact Resistance at 0.5 V & 10 mA 150 m measured w/ 0.5 V & 50 mA, 1.5 ms Dynamic Contact Resistance 250 m after closure 9 Insulation Resistance cross Contacts 100 Volts applied 10 Breakdown Voltage > 60 sec. 10 kVDC Operate Time incl. Bounce 100 % overdrive 3.0 ms Release Time measured with/ no coil suppression 1.5 ms Capacitance at 10 kHz across contact 0.8 pF Test Coil KMS-04 Standard AT range 100 150 AT Environmental Data 1 Shock Resistance / sine wave for 11 ms 50 g 2 Vibration Resistance 10 - 2000 Hz 20 g o o Ambient Temperature max. 10 C / minute allowance -20 130 C o o Stock Temperature max. 10 C / minute allowance -55 130 C o Soldering Temperature 5 sec. dwell 260 C Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy, please see the Life Requirements section. ORDER INFORMATION AT Range Series Contact Form Switch Model Part Number Example - KSK - 1A83 - 100110 (between) KSK - 1A 83 - xxxx 100110 is the AT range (Any AT can be ordered be- Options 100 - 150 tween 100 & 150 in a minimum range of 10 AT) www.meder.com 116