MK17-B-2 Standexmeder

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet MK17 Reed Sensors MK17 Series Reed Sensors Features: Supplied in Tape & Reel, J-Lead, Excellent for Low Power Operations Applications: On/Off Control Switch, Position Detection, Switching Element & Others Markets: Appliance, Telecommunication, Security, Medical & Others Part Description: MK 17 - 0 - X Magnetic Sensitivity Lead Design B, C, D, E 1, 2, 3 Customer Options Switch Model Unit 80 Contact Data Rated Power (max.) 10 W Any DC combination of V&A not to exceed their individual max.s Switching Voltage (max.) 170 V DC or peak AC Switching Current (max.) 0.5 A DC or peak AC Carry Current (max.) 0.5 A DC or peak AC Contact Resistance (max.) 200 mOhm 0.5V & 50mA Breakdown Voltage (min.) 0.21 kVDC According to EN60255-5 Operating Time (max.) 0.6 ms Incl. Bounce Measured with w/ Nominal Voltage Release Time (max.) 0.05 ms Measured with no Coil Excitation Insulation Resistance (typ.) 9 10 Ohm Rh<45%, 100V Test Voltage Capacitance (typ.) 0.4 pF 10kHz across open Switch USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com Modifications in the sense of technical progress are reserved. A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet MK17 Reed Sensors Housing and Lead Specifications MK17 Reed Sensor Housing Material Mineral Filled Epoxy Case Color Black Lead design 1 Flat, straight leads for PCB slot mounting Lead design 2 Flat, bent SMD leads Lead design 3 J-Lead Environmental Data Unit Shock Resistance (max.) 30 g 1/2 sine wave duration 11ms Vibration Resistance (max.) 20 g Operating Temperature -40 to 130 C Handling & Assembly Instructions Storage Temperature -50 to 130 C Soldering Temperature (max.) 260 C 5 sec. max. Use proper lead clamping or heat sinking techniques to prevent mechanical and/or heat stress during, soldering, and welding Glossary Contact Form Mechanical shock as the result of dropping the reed NO = Normally Open Contacts Form A sensor may cause immediate or post-installation SPST = Single Pole Single Throw failure NC = Normally Closed Contacts Form B Reflow Soldering Conditions according to JEDEC SPST = Single Pole Single Throw norm J-STD-020D.1 Changeover Form C SPDT = Single Pole Double Throw Life Test Data Glossary Magnetic Sensitivity *Load increase reduces life expectancy of Reed Switches Sens. A B C D E F G AT 05-10 10-15 15-20 20-25 25-30 30-35 35-40 USA: +1.866.782.6339 salesusa standexmeder.com Version 01 Europe: +49.7731.8399.0 info standexmeder.com 27.01.2015 Asia: +86.21.37820625 salesasia standexmeder.com Modifications in the sense of technical progress are reserved.