TECHNICAL DATA SHEET STANNOL SOLDER WIRE HS10 developed to meet high quality requirements in industrial electronic production as well as quick rework DESCRIPTION The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high quality requirements in industrial electronic production as well as for quick rework. The solder wire HS10 is very efficient by its high activity, which results in quick spread of solder and electrical safe resid ues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1 CHARACTERISTICS This activated rosin shows following properties/advantages: Solid and dry residues, pin testable Fast soldering, high spread speed High reliability APPLICATION The solder wire HS10 can be used for hand and robot soldering in electronics and electrical assembly, audio devices and telecommunication. Flux residues can remain on surfaces without cleaning. If cleaning is necessary for optical or technical reasons, we recommend the use of the cleaner Stannol Flux-Ex 200B or Stannol Flux-Ex 500. PHYSICAL PROPERTIES AND DATA GENERAL PROPERTIES HS10 Flux type: ROM1 (IEC 61190-1-3) / 1.1.2.B (DIN EN 29454-1) / F-SW26 Flux content: standard 2,5 weight % 0,3 % Halide content: 0,9% Corrosion effect: none, acc. to DIN 8516 Lead-containing: Lead-free (Ecoloy Serie) S-Sn60Pb40 Ecoloy TS (S-Sn96Ag4) S-Sn60Pb39Cu1 Ecoloy TSC (S-Sn95Ag4Cu1) Standard alloys S-Pb60Sn40 Ecoloy TC (S-Sn99Cu1) acc. to ISO 9453:2006 S-Sn62Pb36Ag2 Ecoloy TSC305 (S-Sn96Ag3Cu1) S-Sn63Pb37* --- S-Pb93Sn5Ag2 --- Available diameters: from 0,3 mm Available reel sizes: 250 g, 500 g, 1 kg * This alloy is subject to a MOQ Other alloys, diameters flux contents or reel sizes are available on request. STANNOL GmbH TDB LD HS10 EN Issue: 25.08.14 1 Haberstr. 24 42551 Velbert Tel: +49 (0)2051-3120-0 Fax: +49 (0)2051-3120-111 E-Mail: info stannol.de www.stannol.de HEALTH AND SAFETY Before using please read the material safety data sheet carefully and observe the safety precautions described. NOTICE The above values are typical and represent no form of specification. The Data Sheet serves for information purposes. Any verbal or written advise is not binding for the company, whether such information originates from the company offices or from a sales representative. This is also in respect of any protection rights of third parties, and does not release the customer from the responsibility of verifying the products of the company for suitability of use for the intended process or purpose. Should any liability on the part of the company arise, the company will only indemnify for loss or damage to the same extent as for defects in quality. 2 STANNOL GmbH TDB LD HS10 EN Issue: 25.08.14 Haberstr. 24 42551 Velbert Tel: +49 (0)2051-3120-0 Fax: +49 (0)2051-3120-111 E-Mail: info stannol.de www.stannol.de