74V1T14STR

74V1T14 SINGLE SCHMITT INVERTER HIGH SPEED: t = 5.0ns (TYP.) at V =5V PD CC LOW POWER DISSIPATION: I =1 A(MAX.) at T =25C CC A TYPICAL HYSTERESIS: V =700mV at V =4.5V h CC POWER DOWN PROTECTION ON INPUT SOT23-5L SOT323-5L SYMMETRICAL OUTPUT IMPEDANCE: I = I =8mA (MIN)atV =4.5V OH OL CC BALANCED PROPAGATION DELAYS: t t ORDER CODES PLH PHL OPERATING VOLTAGE RANGE: PACKAGE T & R V (OPR) = 4.5V to 5.5V CC SOT23-5L 74V1T14STR IMPROVED LATCH-UP IMMUNITY SOT323-5L 74V1T14CTR DESCRIPTION The 74V1T14 is an advanced high-speed CMOS interface 5V to 3V. Pin configuration and function SINGLE SCHMITT INVERTER fabricated with are the same as those of the 74V1T04 but the sub-micron silicon gate and double-layer metal 74V1T14 has hysteresis. 2 wiring C MOS technology. This together with its schmitt trigger function The internal circuit is composed of 3 stages allows it to be used on line receivers with slow including buffer output, which provide high noise rise/fall input signals. immunity and stable output. The input is equipped with protection circuits against static discharge, giving it ESD immunity Power down protection is provided on input and 0 to 7V can be accepted on input with no regard to and transient excess voltage. the supply voltage. This device can be used to PIN CONNECTION AND IEC LOGIC SYMBOLS April 2004 1/974V1T14 INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN N SYMBOL NAME AND FUNCTION 1 NC Not Connected 2 1A Data Input 4 1Y Data Output 3 GND Ground (0V) V 5 Positive Supply Voltage CC TRUTH TABLE AY LH HL ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit V Supply Voltage -0.5 to +7.0 V CC V DC Input Voltage -0.5 to +7.0 V I V DC Output Voltage -0.5 to V +0.5 V O CC I DC Input Diode Current -20 mA IK I DC Output Diode Current 20 mA OK I DC Output Current 25 mA O I or I DC V or Ground Current 50 mA CC GND CC T Storage Temperature -65 to +150 C stg T Lead Temperature (10 sec) 260 C L Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V Supply Voltage 4.5 to 5.5 V CC V Input Voltage 0to 5.5 V I V Output Voltage 0 to V V O CC T Operating Temperature -55 to 125 C op 2/9