AS-DIP-SO STMicroelectronics

STICE CF/Stice Connect AD/Stice Connect AS/Stice Connect Full-featured cost-effective emulation system for ST microcontrollers Data brief Features Emulation system CF/Stice Connect Real-time emulation of STM8 MCUs (CPU frequency from 250 Hz up to 50 MHz) Application profiling for execution time or number of executions at instruction/source code/function level Coverage analysis on code (at instruction/source code/function level) or data (memory locations or variables) for the AD/Stice Connect entire memory space Unlimited instruction breakpoints for the AS/Stice Connect entire MCU memory space Data breakpoints Advanced breakpoints with up to 4 levels of USB 2.0 (high-speed) interface to host PC user-configured conditions Connection accessories Control of application memory accesses CF/Stice Connect: 60- or 120-pin flexible configurable at byte level cable to connect to the application Trace of 128 K records with time stamp AD/Stice Connect: connection adapter to Non-intrusive read/write on-the-fly to data adapt the connection flex to the target memory during emulation device package Power supply follower managing STM8 AS/Stice Connect: adapter socket application voltages in range 1.65 to 5.5 V soldered onto the application and receiving (0.8 V possible for MEB with specific TEB) the AD/Stice connect 8-bit probe analyzer Input trigger and 2 output triggers Table 1. Device summary In-circuit debugging/programming via Part numbers Contents SWIM STICE Emulation system CF/Stice Connect Connection flex Connection adapter for AD/Stice Connect target device package or SWIM connector AS/Stice Connect Adapter socket May 2011 Doc ID 13797 Rev 4 1/9 For further information contact your local STMicroelectronics sales office. www.st.com 9Description STICE Description The STice is the advanced in-circuit emulation system from STMicroelectronics. It offers a complete range of proven debugging features such as advanced breakpoints and trace recording. In addition, it provides new profiling and coverage capabilities to help detect and eliminate dead code and bottlenecks in application execution. In addition to emulation, the STice provides in-circuit debugging and programming capability for ST microcontrollers via the ST single wire interface module (SWIM). SWIM allows non- intrusive debugging of an application while it runs on the target microcontroller. The STice is supported by the free STM8 toolset, which includes the ST Visual Develop (STVD) integrated development environment for building, debugging and fine-tuning applications, the ST Visual Programmer (STVP) microcontroller programming interface and the STM8 Assembler. The STice offers improved cost-effectiveness by allowing users to order exactly what they need to meet their development requirements and to adapt their emulation system to support existing and future ST microcontrollers. All these connection accessories and the STice emulation boards can be ordered independently as replacement parts. 2/9 Doc ID 13797 Rev 4