SPC560PADPT100S STMicroelectronics

SPC560PADPT100S, SPC560PADPT144S Data brief SPC560Pxx microcontroller family evaluation board Features SPC560Pxx modular evaluation system On/off power switch with LED indicators Board power supply: 12 VDC external supply voltage Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target Up to two CAN channels with jumper enable One CAN channel with High-Speed transceiver and DB9 male connector One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector Up to two LIN channels with jumper enable One channel with transceiver and pin header connector populated One channel with footprints only One SCI channel with jumper enables, transceiver and DB9 female connector Up to two FlexRay channels with jumper enables One channel with transceiver and DB9 male connector One channel with footprint only Four user push buttons with jumper enable and polarity selection Four user LEDs with jumper enables One potentiometer for analog voltage input Product status link Pin array for accessing all I/O signals SPC560PADPT100S Expansion connectors for accessing all I/O signals SPC560PADPT144S Prototyping area with 0.1 spacing and SOIC footprint Specifications: Product summary Board size 110 mm x 75 mm Order code SPC560PADPT100S 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory Mini module for Standard connectors to SPC56XXMB Reference SPC560P44L3 and (1) SPC560P50L3 Description Order code SPC560PADPT144S The SPC560PADPT100S and SPC560PADPT144S are evaluation systems Mini module for Reference SPC560P44L5 and supporting the STMicroelectronics SPC560Pxx family of automotive (1) SPC560P50L5 microprocessors. Order code SPC56XXMB The complete system consists of an SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for Mother board for SPC56xx Reference evaluating the whole family of devices in all supported packages. family of devices The evaluation system (motherboard and daughter card) allows full access to the 1. The MCU is not included, it must be CPU, all the CPU s I/O signals, and the motherboard peripherals (such as CAN, SCI purchased separately. Please contact and LIN). The mini modules itself can be used as a standalone unit when access to your sales representative for more the I/O pins or peripherals is not needed. details. The MCU is not included, it must be purchased separately. Please contact your sales representative for more details. DB1746 - Rev 3 - December 2019 www.st.com For further information contact your local STMicroelectronics sales office.SPC560PADPT100S, SPC560PADPT144S Revision history Table 1. Document revision history Date Version Changes Initial release. 04-Sep-2012 1 SPC560PADPT100S and SPC560PADPT144S were previously in document DM00044221 (DocID 022591) revision 1. 13-Sep-2013 2 Updated disclaimer. Updated features in cover page. 16-Dec-2019 3 Added product status link table and product summary table. Minor text changes. DB1746 - Rev 3 page 2/3