SPC560B64A100S, SPC560BADPT144S, SPC560BADPT176S Data brief SPC560Bxx microcontroller family evaluation board Features SPC560Bxx modular evaluation system On/off power switch with LED indicators Board power supply: 12 VDC external supply voltage Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target Up to two CAN channels with jumper enable Product status link One CAN channel with High-Speed transceiver and DB9 male connector One CAN channel with Low-Speed Fault Tolerant and High-Speed SPC560B64A100S transceiver (selectable with jumpers) and DB9 male connector SPC560BADPT144S Up to two LIN channels with jumper enable SPC560BADPT176S One channel with transceiver and pin header connector populated One channel with footprints only One SCI channel with jumper enables, transceiver and DB9 female connector Four user push buttons with jumper enable and polarity selection Four user LEDs with jumper enables One potentiometer for analog voltage input Pin array for accessing all I/O signals Expansion connectors for accessing all I/O signals Prototyping area with 0.1 spacing and SOIC footprint Product summary Specifications: Order code SPC560B64A100S Board size 110 mm x 75 mm Mini module for: 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory SPC560B40L3, Standard connectors to SPC56XXMB Reference SPC560C40L3 SPC560B50L3, (1) SPC560C50L3 Description Order code SPC560BADPT144S The SPC560B64A100S, SPC560BADPT144S and SPC560BADPT176S are evaluation systems supporting the STMicroelectronics SPC560Bxx family of Mini module for: automotive microprocessors. Reference SPC560B40L5, (1) SPC560B50L5 The complete system consists of an SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for Order code SPC560BADPT176S evaluating the whole family of devices in all supported packages. Mini module for: Reference The evaluation system (motherboard and daughter card) allows full access to the (1) SPC560B64L7 CPU, all the CPU s I/O signals, and the motherboard peripherals (such as CAN, SCI Order code SPC56XXMB and LIN). The mini modules itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed. Mother board for SPC56xx Reference family of devices. The MCU is not included, it must be purchased separately. Please contact your sales representative for more details. 1. The MCU is not included, it must be purchased separately. Please contact your sales representative for more details. DB1745 - Rev 3 - December 2019 www.st.com For further information contact your local STMicroelectronics sales office.SPC560B64A100S, SPC560BADPT144S, SPC560BADPT176S Revision history Table 1. Document revision history Date Version Changes Initial release. 04-Sep-2012 1 SPC560B64A100S, SPC560BADPT144S and SPC560BADPT176S were previously in document DM00044221 (DocID 022591) revision 1. 13-Sep-2013 2 Updated disclaimer. Updated features in cover page. 10-Dec-2019 3 Added product status link table and product summary table. Minor text changes. DB1745 - Rev 3 page 2/3