STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS Raisonances complete, low-cost starter kits for STM8 and ST7 Data brief Features Embedded RLink USB interface to host PC In-circuit debugging and programming Application board connection via ST SWIM, ICC or JTAG REva motherboard 1 standard SO-DIMM connector to plug in daughterboards Digital and analog I/O evaluation features, including on-board LEDs, buttons, switches, external analog connector, temperature sensor and potentiometer IC EEPROM and bus RS-232 driver and 2 DB9 connectors Prototype area Description VDD settings for 1.8 V, 3.3 V and 5 V The REva starter kits are Raisonances complete, microcontrollers cost-effective solutions for starting application USB powered, no external power required development and evaluating STM8x, ST7LITEx, Interchangeable REva daughterboard ST7Fox, ST7232x, ST7234x and ST7236x microcontrollers. Features different STM8 and ST7 MCUs to permit application development for a wide Kits contain all the hardware and software range of devices and may include required to develop applications for additional device specific features microcontrollers, including the REva evaluation Raisonance software board, target STM8 and ST7 microcontrollers, embedded RLink for in-circuit debugging and in- Ride7: Editor, SIMICE simulator, Rbuilder, circuit programming and the raisonance C compiler, debugger, Project manager, integrated development environment (Ride7) with and CodeCompressor application builder. RFlasher7 device programming interface July 2014 DocID11271 Rev 7 1/8 For further information contact your local STMicroelectronics sales office. www.st.comContents STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS Contents 1 Architecture 3 2 REva starter kits 4 3 Ordering information 6 4 Revision history 7 2/8 DocID11271 Rev 7