30W Single Output Enclosed DC-DC Converter Classifications Image Key Features 24V DC Input Soft start, low Inrush current Input & output isolation Input polarity reverse protection Input under / over voltage protection Over load, over voltage & short circuit protection Output voltage 10% adjustment 100% 50C burn-in test Meet UL, cUL, TUV, CB, CE standard Dimensions 99 x 82 x 35mm Technical Specifications Input Voltage 18VDC ~ 36VDC (Typical 24VDC) Input Current <2.6A 18V DC input, full load condition Rise time < 20mS Short circuit Protection Should short circuit condition occur the output will shutdown, recovers automatically after fault condition has been removed. Working Temperature,Humidity 0C~70C de-rating: 50C ~70C : 2.5%/C. 20% ~ 85% RH non condensing Storage Temperature, Humidity -10C ~ +75C 10% ~ 95% RH non condensing Safety Standards Meets UL 60950, CSA C22.2 No.60950, TUV EN 60950, IEC 60950, EMKO-TSE (74-SEC)207/94 EMC FCC CFR 47 PART 15 CLASS B, EN 50081-1, CNS 13438 CLASS B, EN 50082-1 (1997) M.T.B.F. 417K hours Table Specification Part No Voltage Min Load Max Load Reg R&N Efficiency OVP SDS-030B3.3 3.3V 0A 7.0A 3% 40mV 68% +3.8V ~ +4.6V SDS-030B05 5.0V 0A 6.0A 2% 50mV 70% +5.8V ~ +7.0V SDS-030B7.5 7.5V 0A 4.0A 2% 75mV 70% +8.6V ~ +10.5V SDS-030B12 12V 0A 2.5A 1% 100mV 74% +13.8V ~ +17.5V SDS-030B24 24V 0A 1.3A 1% 200mV 76% +27.6V ~ +33.6V SDS-030B48 48V 0A 0.65A 1% 250mV 78% +55.2V ~ +67.2V We make every effort to ensure the information provided is accurate. However, we can not be held responsible for errors, specifications are subject to change without notice. Please ensure the product is suitable for your intended application.