TS19340CS14 RLG Taiwan Semiconductor

TS19340CS14 Taiwan Semiconductor Secondary-Side Constant Current and Constant Voltage Controller with PWM / Linear Dimming DESCRIPTION FEATURES Secondary-side CC and CV Control The TS19340CS14 provides an integrated solution High accuracy internal voltage reference using built in switch mode constant current (CC) and Build in PWM & Linear dimming functions constant voltage (CV) regulation for isolation smart LED current cut-off function LED lighting applications. The built in PWM and Built-in 3.3V reference for dimming Power linear dimming functions allows the designer to Compliant to RoHS Directive 2011/65/EU and in replace many external discrete components used for Accordance to WEEE 2002/96/EC. dimming schemes. The PWM frequency is Halogen-free according to IEC 61249-2-21 configurable from 100Hz-10kHz through selection of the compensation capacitor. The linear dimming cut APPLICATION off voltage is configurable using a resistor divider at LED lighting Intelligent lighting management the CCO pin SOP-14 Pin Definition: 1. V 14. V D CC 2. CCH 13. FB 3. CCL 12. V SEN 4. CCO 11. PHO 5. PWM 10. N/C 6. N/C 9. SWO 7. GND 8. COM Notes: MSL 3 (Moisture Sensitivity Level) per J-STD-020 TYPICAL APPLICATION CIRCUIT PWM Dimming Application Circuit Linear Dimming Application Circuit 1 Version: B1705 TS19340CS14 Taiwan Semiconductor (Note 1) ABSOLUTE MAXIMUM RATINGS (T = 25C unless otherwise specified) A PARAMETER SYMBOL LIMIT UNIT Power Supply Pin V 40 V CC PHO Voltage to GND V -0.3 to 40 V PHO SWO Voltage to GND V -0.3 to 40 V SWO FB Voltage to GND V -0.3 to 5.5 V FB VSEN Voltage to GND V -0.3 to 5.5 V VSEN COM Voltage to GND V -0.3 to 5.5 V COM CCH Voltage to GND V -0.3 to 5.5 V CCH CCL Voltage to GND V -0.3 to 5.5 V CCL CCO Voltage to GND V -0.3 to 5.5 V CCO PWM Voltage to GND V -0.3 to 5.5 V PWMB Junction Temperature Range T -40 to +150 C J Storage Temperature Range T -65 to +150 C STG Lead Temperature (Soldering 10 sec) T 260 C LEAD Power Dissipation T =25 C P 0.833 W A D (Note 2) ESD Rating (Human Body Mode) HBM 2 kV (Note 3) THERMAL PERFORMANCE PARAMETER SYMBOL LIMIT UNIT Thermal Resistance Junction to Ambient R 120 C/W JA (Note 4) RECOMMENDED OPERATING CONDITION (T = 25C unless otherwise specified) A PARAMETER SYMBOL LIMIT UNIT Power Supply Pin V 38 V CC PHO Voltage to GND V -0.3 to 38 V PHO SWO Voltage to GND V -0.3 to 38 V SWO FB Voltage to GND V -0.3 to 5 V FB VSEN Voltage to GND V -0.3 to 5 V VSEN COM Voltage to GND V -0.3 to 5 V COM CCH Voltage to GND V -0.3 to 5 V CCH CCL Voltage to GND V -0.3 to 5 V CCL CCO Voltage to GND V -0.3 to 5 V CCO PWM Voltage to GND V -0.3 to 5 V PWM Operating Junction Temperature Range T -40 to +125 C J C Operating Ambient Temperature Range T -40 to +85 OPA 2 Version: B1705